Author Topic: Getting an 'aluminum' look with a rattle can (Read 4015 times)

ED209 · « **on:** January 23, 2012, 08:57 AM »

Anyone done this? I was gonna use a chrome spray that then dulls down when its lacquered.

Maybe rub the raw paint down with a cloth before the lacquer? anyone got any better methods/ paints to get an alloy look?

cheers then

pickle · « **Reply #1 on:** January 23, 2012, 09:03 AM »

what the fook are you on about now?

griff · « **Reply #2 on:** January 23, 2012, 09:34 AM »

must have run out of tin foil...

ED209 · « **Reply #3 on:** January 23, 2012, 09:39 AM »

Quote from: pickle on January 23, 2012, 09:03 AM

what the fook are you on about now?

if you don't know don't comment you fool.

ED209 · « **Reply #4 on:** January 23, 2012, 09:40 AM »

Quote from: griff on January 23, 2012, 09:34 AM

must have run out of tin foil...

...not sure about a whole frame Griff la Spliff... but its an option

Dark Diggler · « **Reply #5 on:** January 23, 2012, 09:43 AM »

Chrome spray then fine sanding should be sommat like

ED209 · « **Reply #6 on:** January 23, 2012, 09:46 AM »

Quote from: Dark Diggler on January 23, 2012, 09:43 AM

Chrome spray then fine sanding should be sommat like

cheers Si... s'wat I was a thunkin

R Al · « **Reply #7 on:** January 23, 2012, 10:17 AM »

You could try a cold zinc galv spray
http://www.ebay.co.uk/itm/ZG-90-Col-Zinc-Galvanising-Aerosol-SprayZG-90-Col-Zinc-Galvanising-Aerosol-Spray-/250977626480?pt=LH_DefaultDomain_3&hash=item3a6f6ea970

ED209 · « **Reply #8 on:** January 23, 2012, 10:19 AM »

looks nice but I don't fancy the work involved getting my frame back to bare metal!

cheers though

Dannywhac · « **Reply #9 on:** January 23, 2012, 10:42 AM »

Send it to me Ed - I forkin' love stripping frames

Rodgy1970 · « **Reply #10 on:** January 23, 2012, 12:47 PM »

By the time you muck about with spray bomb you could get it blasted and powdered silver for just a few quid more.

ED209 · « **Reply #11 on:** January 23, 2012, 12:50 PM »

Quote from: dannywhac on January 23, 2012, 10:42 AM

Send it to me Ed - I forkin' love stripping frames

Dan I have enough trouble sending you your own frame! never mind mine too

ED209 · « **Reply #12 on:** January 23, 2012, 12:51 PM »

Quote from: rodriguez on January 23, 2012, 12:47 PM

By the time you muck about with spray bomb you could get it blasted and powdered silver for just a few quid more.

Budget Build = rattlecan
Dream machine = SuperBikeDan

griff · « **Reply #13 on:** January 23, 2012, 03:21 PM »

Quote from: dannywhac on January 23, 2012, 10:42 AM

Send it to me Ed - I forkin' love stripping frames

I'll remember that comment when it's time to give my mirraco the 'raw' treatment

better let you fix the laptop first tho

Dannywhac · « **Reply #14 on:** January 23, 2012, 03:36 PM »

Bring it on

Nowt like spending a Sunday evening on the kitchen floor high on Nitromors fumes

sid1972 · « **Reply #15 on:** January 23, 2012, 05:17 PM »

It can be done, spray it first in a good quality silver paint, not halfords shxt. Go to a paint supplier that mixes aerosol's etc.

Once it has gone off/hard, give it a good couple of days. Use one of those sanding blocks (black the smooth ones for light sanding) and gently drag it along the surface. The key is to go in all one direction (not backwards and forwards) and try not to go over the same area twice.

Hope that makes sense.

john4130 · « **Reply #16 on:** January 24, 2012, 05:45 PM »

i tried it with chrome spray and then sanded, it just turned dark grey and looked shit. i've been thinking of trying another way, i use something called venture clad at work. it's a thin aluminium sheet with a sticky back and much stronger than tin foil so it's a slight improvement from lennys idea.

Skid · « **Reply #17 on:** January 24, 2012, 07:03 PM »

You can buy Aluminium finish spray paint, as well as Chrome. One is shiny (chrome), the other is matt (Ali). They usually sit side by side at your local car parts shop. A lot easier than buying Chrome and sanding the fooker down.

http://www.google.co.uk/search?q=aluminium+spray+paint&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a

ED209 · « **Reply #18 on:** January 24, 2012, 07:16 PM »

thats for all the thoughts people

ozone · « **Reply #19 on:** January 25, 2012, 08:45 AM »

Quote from: ED209º on January 23, 2012, 10:19 AM

looks nice but I don't fancy the work involved getting my frame back to bare metal!

cheers though

You might have to do just that if the paint you buy reacts with the paint on the frame. Why not go back to bare metal, polish up the metal (be that steel or alloy) and clearcoat that. Proper industrial.

pickle · « **Reply #20 on:** January 25, 2012, 08:56 AM »

or just fooking leave it green

Rodgy1970 · « **Reply #21 on:** January 25, 2012, 07:33 PM »

I've used cold galvinising spray, would look right but I found it to be soft and rub off pretty easily.

Author Topic: Getting an 'aluminum' look with a rattle can (Read 4015 times)

griff

Rodgy1970

griff

sid1972

Skid

ozone

Rodgy1970