Author Topic: What grips and levers are these? (Read 1991 times)

wildon · « **on:** January 13, 2012, 12:08 AM »

I know the pics aint much to go by, but it's all i got .. can anyone tell what they are?

wildon · « **Reply #1 on:** January 13, 2012, 12:13 AM »

The grips look like the ame/gt ones but i doubt there would have been gt grips on here .. did ame make them without the gt logo?

popedante · « **Reply #2 on:** January 13, 2012, 12:17 AM »

look like AME supersoft grips

lever could be ACS ?

wildon · « **Reply #3 on:** January 13, 2012, 12:20 AM »

Super softs have flanges though .. these look flangless

Discostu · « **Reply #4 on:** January 13, 2012, 12:34 AM »

They look like super soft grips to me. They did make them flange less.

wildon · « **Reply #5 on:** January 13, 2012, 12:39 AM »

Did they? they would prob be the same as the gt ones then i suppose ... http://www.ebay.com/itm/Old-School-GT-LOGO-AME-BMX-Performer-GRIPS-WHITE-NOS-/320828851953?pt=Cycling_Parts_Accessories&hash=item4ab2e3c6f1#ht_751wt_1314

Or is it these .... http://www.ebay.com/itm/AME-AME-Bubble-Era-correct-Grips-BABY-BLUE-USA-NEW-/120572578520?pt=Cycling_Parts_Accessories&hash=item1c12af8ad8#ht_795wt_1144

john4130 · « **Reply #6 on:** January 13, 2012, 05:20 PM »

the grips are the gt ame grips not sure about the levers, possibly odyssey.

Why isnt this working · « **Reply #7 on:** January 13, 2012, 05:33 PM »

Ame grips. Tech 5's I think..

Si

wildon · « **Reply #8 on:** January 13, 2012, 05:40 PM »

Quote from: why isnt this working on January 13, 2012, 05:33 PM

Ame grips. Tech 5's I think..

Si

I thought tech 5's but they wrap around the bars on the top with no break .. these look to have a break in them there .. if that makes sense

Why isnt this working · « **Reply #9 on:** January 13, 2012, 06:57 PM »

Quote from: wildon on January 13, 2012, 05:40 PM

Quote from: why isnt this working on January 13, 2012, 05:33 PM
Ame grips. Tech 5's I think..

Si

I thought tech 5's but they wrap around the bars on the top with no break .. these look to have a break in them there .. if that makes sense

Ahhh yes your right. Hmmm not sure then fella $:-\$

Si

ozone · « **Reply #10 on:** January 13, 2012, 08:29 PM »

Quote from: wildon on January 13, 2012, 05:40 PM

Quote from: why isnt this working on January 13, 2012, 05:33 PM
Ame grips. Tech 5's I think..

Si

I thought tech 5's but they wrap around the bars on the top with no break .. these look to have a break in them there .. if that makes sense

Tech 5's do have a break in them (how else could you loosen or tighten them) but Tech 4's etc. were a two piece design. Probably tech 5's IMO...

http://www.ebay.co.uk/itm/NOS-Dia-Compe-Levers-Dia-Compe-BMX-Brake-Levers-Dia-Compe-Tech-5-BMX-Levers-/190614820187?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item2c6187555b#ht_744wt_1270

Discostu · « **Reply #11 on:** January 13, 2012, 08:38 PM »

They look like acs locking levers. Do you have any better pics?

wildon · « **Reply #12 on:** January 24, 2012, 10:44 AM »

Got no better pics, just some images from a video but they still aint that good. I don't think they are ACS as the barrel end of the inner cable is visible from the top

snav69 · « **Reply #13 on:** January 24, 2012, 10:49 AM »

Odyssey RX-3

wildon · « **Reply #14 on:** January 24, 2012, 10:58 AM »

Quote from: ... -. .- ...- on January 24, 2012, 10:49 AM

Odyssey RX-3

Think there are too many holes in those..

Maybe these

... http://bmxmuseum.com/forsale/33829

snav69 · « **Reply #15 on:** January 24, 2012, 11:52 AM »

Gloves look familiar, You doing a Dizz

Peter J · « **Reply #16 on:** January 24, 2012, 12:09 PM »

ACS 860's

http://bmxmuseum.com/forums/viewtopic.php?id=15155

wildon · « **Reply #17 on:** January 24, 2012, 12:38 PM »

Quote from: Peter J on January 24, 2012, 12:09 PM

ACS 860's

http://bmxmuseum.com/forums/viewtopic.php?id=15155

I think they may be .. but if so they must have the decal missing to show the cable barrel .. but does the decal cover a hole?

Discostu · « **Reply #18 on:** January 24, 2012, 12:58 PM »

i would assume that the pic i put on has had the levers removed from the housings and been fitted the wrong way round. ie left lever into right lever housing etc. either way i think these are your levers mate.

deeman · « **Reply #19 on:** January 24, 2012, 12:59 PM »

Quote from: wildon on January 24, 2012, 12:38 PM

Quote from: Peter J on January 24, 2012, 12:09 PM
ACS 860's

http://bmxmuseum.com/forums/viewtopic.php?id=15155

I think they may be .. but if so they must have the decal missing to show the cable barrel .. but does the decal cover a hole?

i dont think the decal covers a hole on the acs levers,its cast so the barrel doesnt show on the top!

EDIT,my mistake sorry ive been doin alot of research into ACS levers myself last few days.there are several types,on some there is a decal covering the hole.like a tech V but with a decal over it,i think these are earlier ones.the ones with the lever cast over the barrel are slightly later!

snav69 · « **Reply #20 on:** January 26, 2012, 09:58 AM »

http://www.ebay.co.uk/itm/pair-Black-Rear-BMX-Bike-Brake-Lever-w-parking-brake-/280767277728?pt=Cycling_Parts_Accessories&hash=item415f08aaa0#ht_647wt_1396

$:-\$

wildon · « **Reply #21 on:** January 26, 2012, 10:02 AM »

Quote from: ... -. .- ...- on January 26, 2012, 09:58 AM

http://www.ebay.co.uk/itm/pair-Black-Rear-BMX-Bike-Brake-Lever-w-parking-brake-/280767277728?pt=Cycling_Parts_Accessories&hash=item415f08aaa0#ht_647wt_1396

$:-\$

Cheers! i was looking for these

although now i'm not so sure the ones in the pics have locking buttons $:-\$