innertubes?

[dubber]

anyone know whats good and whats shite,
just blown mine, went to put 90 odd psi in, 10 mins later its flat as a pancake, tyres can take 110...tom white walls..20x2.0s
want a couple that can take that sort of pressure..
thanks chaps..

[monkeybat]

Certain sites sell extra thick Inner tubes, just cant remember which one, sorry.

[mattuknc]

Halfrauds do the anti puncture ones, or a standard 5 pack for £15. (Been ok so far, only run upto 60 psi though)

[Jon The Bassist]

I run my NS race cruiser tyres at about 90 usually and use any tubes. Main thing is that they're clean, don't get pinched and are well-fitted, and that the tyre itself is capable of supporting that high pressure.

[welsh denny]

i use tesco tubes . run em up to 100 psi on my flatland bike. had the odd one blow after 2 years or so so not bad for around 2 quid each.

[pickle]

Have you checked your rim tape is thick enough?  i used to have to run a cut tube over the top on some of my old rims as the spoke nipples kept pinching them.

[Jon The Bassist]

Have you checked your rim tape is thick enough?  i used to have to run a cut tube over the top on some of my old rims as the spoke nipples kept pinching them.

Good point - once when I took my wheels to my LBS for their regular spoke replacement and truing  , they installed some really tough woven rimtape designed for MTBing, seems to have helped for me

[wildon]

used loads of new ones for show bikes with only 30 odd psi in and a few of them go flat all the time .. loads of rim tape too