gfxgfx
 
logo
 
gfx gfx
gfx
975808 Posts in 138943 Topics by 6371 Members - Latest Member: Robertflamn November 27, 2024, 04:49 AM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Cleaning out Seat tube
gfx
gfxgfx
 

Author Topic: Cleaning out Seat tube  (Read 945 times)

0 Members and 1 Guest are viewing this topic.

Knoxxy

  • Guest
Cleaning out Seat tube
« on: March 15, 2012, 09:38 AM »
I'm building a Redline cruiser & went to put seat post in.
It sounds horrible & the post is super tight, and scratched when removed.
Sounds like the tube is full of rust.

Any tips for cleaning out the tube before fitting?
Thanks.
Knoxxy.

Offline Dannywhac

  • BMX Nerd
  • *********
  • Posts: 4937
  • return of the whac
  • Rated:
Re: Cleaning out Seat tube
« Reply #1 on: March 15, 2012, 09:45 AM »
I use a bottle brush you can get in homebrew shops + a squirt of WD-40 to give em a good blast out :)

Also check for weld spatter on the inside of the tube where the seat stays meet the seattube - if there is some get a metal file and give it a going over.
"Listen. I don't care what you say. Chlamydia is a soup." (Phelps, L. 2000)

Knoxxy

  • Guest
Re: Cleaning out Seat tube
« Reply #2 on: March 15, 2012, 02:05 PM »
Great tips.
Thank you!

Offline sawzall

  • 540 Air
  • *******
  • Posts: 2793
  • Rated:
Re: Cleaning out Seat tube
« Reply #3 on: March 15, 2012, 08:12 PM »
i use a flexi drive on a drill with a flap wheel :daumenhoch:
British race frames and race clothing wanted

Offline Gary72

  • Site Supporter
  • BMX Nerd
  • *
  • Posts: 4218
  • Rated:
Re: Cleaning out Seat tube
« Reply #4 on: March 15, 2012, 10:32 PM »
Also check the slit/hole at the top.

Offline oldschoolib

  • Rockwalk
  • ***
  • Posts: 552
  • Rated:
Re: Cleaning out Seat tube
« Reply #5 on: March 15, 2012, 10:54 PM »
sawzall x2

skyway67

  • Guest
Re: Cleaning out Seat tube
« Reply #6 on: March 15, 2012, 11:43 PM »
hi had the same trouble so i honed it out at work
 :daumenhoch:


Offline animal

  • Team Moderator
  • BMX Nerd
  • *
  • Posts: 4627
  • MRD Loony & proud
  • Rated:
Re: Cleaning out Seat tube
« Reply #7 on: March 16, 2012, 10:06 AM »
If its just rust will the seatpost tube with vinegar. This will clean all the rust off in a couple of hours  ;)

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Cleaning out Seat tube
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal