Author Topic: Tuf neck /Pro neck Shaft Extraction (Read 647 times)

crazycraig · « **on:** September 09, 2011, 09:18 AM »

How the fook do these things come out ? Are they threaded ?

hazzajoe · « **Reply #1 on:** September 09, 2011, 09:29 AM »

not sure if all them are, but mine is.

I clamped the stem using soft jaws in a large bench vice and using a socket and power bar . I cracked it off the normal way. Anti-clockwise. around the large bolt head I used electrical tape to protect the face of the stem from the socket.

I'm sure people have better ways.

crazycraig · « **Reply #2 on:** September 09, 2011, 09:31 AM »

Are you talking about the shaft or the large nut hazza ?

crazycraig · « **Reply #3 on:** September 09, 2011, 11:37 AM »

So they are not threaded ? This threads for you Snav !!!! 3 into 1 does go

meticulous · « **Reply #4 on:** September 09, 2011, 01:20 PM »

craig, heat up the alloy with heat gun/paint stripper gun, and get the alloy red hot, it will expand enough to allow just a light tap with a lump hammer on top of the big nut, better still send it to CCA, they do it all for you if your having it re-anoed...