Author Topic: bleaching Z rims? (Read 2301 times)

wazza · « **on:** August 23, 2011, 06:49 PM »

Has anyone bleached any white Z rims

im a bit hesitant to say the least $:-\$

wildon · « **Reply #1 on:** August 23, 2011, 06:51 PM »

I have, it wont hurt them at all .. but they dont go bright white. They were an off white from the factory

WINI · « **Reply #2 on:** August 23, 2011, 07:00 PM »

Quote from: wildon on August 23, 2011, 06:51 PM

I have, it wont hurt them at all .. but they dont go bright white. They were an off white from the factory

Me too. Cleaned right up no probs

Pooch · « **Reply #3 on:** August 23, 2011, 07:16 PM »

Bendycats good for the bleaching. If you bleach for too long can it break down the plastic?

Discostu · « **Reply #4 on:** August 23, 2011, 07:24 PM »

Pm sent wazza

skki3330 · « **Reply #5 on:** August 23, 2011, 09:49 PM »

Got some bleaching as i type takes about 5-7 day with z-rims with tesco cheap bleach

wazza · « **Reply #6 on:** August 23, 2011, 09:56 PM »

i await your full report with pics

rollin72 · « **Reply #7 on:** August 23, 2011, 10:28 PM »

120 grit sandpaper, give a gentle rub then use 12/1400 wet'n'dry and they come up gleaming, takes about 2 hours, sack the bleach

ozone · « **Reply #8 on:** August 24, 2011, 08:35 AM »

Quote from: rollin72 on August 23, 2011, 10:28 PM

120 grit sandpaper, give a gentle rub then use 12/1400 wet'n'dry and they come up gleaming, takes about 2 hours, sack the bleach

Totally agree with that. I had some in bleach for a week with no success so I took them out and hit them with some wet and dry. Mine had a discoloured layer of build-up that the bleach wouldn't touch but wet and dry sorted that right out and they were lovely and white once sorted...

BENDYCAT ELEVENTEEN · « **Reply #9 on:** August 24, 2011, 10:38 AM »

I have done Agayguffs

Best bet is to spend time sanding them down and reshaping them right - don't go to harsher grade or you will be just chasing all the line out

I used a stanley razor blade to flattern down the brake rub area - then to take out any chips - then rub down with wet and dry till you get down the grades to a smooth finish

then after a good 2-4 hours, you can then put them in bleach for a few days to a week

do check every day - too much and the plastic can get brittle and start to get dusty when dry

cheers B

rollin72 · « **Reply #10 on:** August 24, 2011, 07:31 PM »

you dont need to put them in bleach, why risk fookin them up when you can see from the pics the results you can achieve with wet'n'dry

AKGOFF · « **Reply #11 on:** August 24, 2011, 08:06 PM »

Quote from: BENDYCAT ELEVENTEEN on August 24, 2011, 10:38 AM

I have done Agayguffs

Best bet is to spend time sanding them down and reshaping them right - don't go to harsher grade or you will be just chasing all the line out

I used a stanley razor blade to flattern down the brake rub area - then to take out any chips - then rub down with wet and dry till you get down the grades to a smooth finish

then after a good 2-4 hours, you can then put them in bleach for a few days to a week

do check every day - too much and the plastic can get brittle and start to get dusty when dry

cheers B

Any chance i can have them back then along with my Red Skyways you Flid

rollin72 · « **Reply #12 on:** August 24, 2011, 08:37 PM »

he's left them in the bleach too long and smashed them

BENDYCAT ELEVENTEEN · « **Reply #13 on:** August 24, 2011, 09:00 PM »

bleach just take out any of the impurities and gives them a better white - notice how i said you have to be carefull of how long they have to be in bleach

not to mess them up

AGAYGUFF - no you flid you can't just yet

now go bum splooch

wildon · « **Reply #14 on:** August 24, 2011, 09:07 PM »

Quote from: rollin72 on August 23, 2011, 10:28 PM

120 grit sandpaper, give a gentle rub then use 12/1400 wet'n'dry and they come up gleaming, takes about 2 hours, sack the bleach

will this work on white tuffs too?

BENDYCAT ELEVENTEEN · « **Reply #15 on:** August 25, 2011, 11:20 AM »

yes but it's hard work

Pooch · « **Reply #16 on:** August 25, 2011, 11:37 AM »

Quote from: BENDYCAT ELEVENTEEN on August 25, 2011, 11:20 AM

yes but it's hard work

What do you know about hard work you lump

AKGOFF · « **Reply #17 on:** August 25, 2011, 01:36 PM »

Quote from: Pooch on August 25, 2011, 11:37 AM

Quote from: BENDYCAT ELEVENTEEN on August 25, 2011, 11:20 AM
yes but it's hard work
What do you know about hard work you lump

BENDYCAT ELEVENTEEN · « **Reply #18 on:** August 25, 2011, 01:58 PM »

I seen you try to ride a bmx - now that looks hard work

skwaym4n · « **Reply #19 on:** August 26, 2011, 07:01 AM »

I have recently bought a set of mike buffs that were ..lets say grubby...lots of stains grease etc ... see the pics. I have done a couple of sets of skyways and fine there isn't much difference in the amount of time left in bleach and have only left in for a max of 24 hours. These Z's were left in for only 2 hours. There are still some grey dots in the rims but overall they cam out well. I will be going down the wet and dry route in the future with some new spokes etc as Bendy suggests but my only hesitancy is that Mike Buffs are cream and if I wet and dry they will come up white but I am sure I will then be able to dye them back to cream. Here is how they came out after a quick rub with brillo scourer and a lil bleach. These are now fit for their purpose to go on my Huffy rider... Hopefully I will got it done for the 4th ...

ozone · « **Reply #20 on:** August 26, 2011, 08:15 AM »

Nowt better than a bleached rim.

(insert picture)

Author Topic: bleaching Z rims? (Read 2301 times)

wazza

wazza

ozone

skwaym4n

ozone