Author Topic: Schwinn Freeform build FINISHED (Read 4026 times)

Gnarlyscoots · « **on:** August 08, 2011, 07:46 PM »

Well guys, this is not going to be built to factory spec, far from it. It is chrome and was powdered over the top. Powder was removed and the f+f polished

It's not 100% percent but I'm not worried as I will be riding the shit out of it

I will be building it in the 2 old school anno colours of Red and Gold (and some polished parts too, all my spare junk and more

)

I have now fitted the old Tange headset from my Haro and Tange locking nut. Pics will be added as we go along so any input is cool

Cable runs through the potts mod, down the forks tube and out the left fork for a front freestyle caliper

Polished and Headset fitted

Gnarlyscoots · « **Reply #1 on:** August 08, 2011, 07:47 PM »

Eastern gold anno BB and MX gold anno clamp fitted

Gnarlyscoots · « **Reply #2 on:** August 08, 2011, 07:48 PM »

NOS gold anno Sugino 40T chainring, Sugino Spider and near mint Sugino bolt set plus twin bolt Redline 180's fitted

(Ignore the Skyway guys, got something special for this

)

Dia Compe 750 rear caliper (re-issue but hey, the only difference is the retaining nuts are allen key bolts, and the date) for under the frame fitment fitted

Gnarlyscoots · « **Reply #3 on:** August 08, 2011, 07:48 PM »

I got these babies for it

Got to strip down, clean the rims, polish the sweet looking HF ACS gold anno hubs and re-lace with some S/Steel double butted HKS spokes

Gnarlyscoots · « **Reply #4 on:** August 08, 2011, 07:49 PM »

Original Elina UL chequered layback post and red Elina Flyte Tech fitted

Gnarlyscoots · « **Reply #5 on:** August 08, 2011, 07:49 PM »

Put the red Skyways on for now dudes as it looked pants with balck

and my B E A U T I F U L ACS 55 slant turned up today

And NOS gold ACS seatclamp replaced the MX gold clamp

Think i'm going to run it without a rotor though

Bars are down the postie's as the nooby from the states didn't post it like I asked so it has acrued a fookin' customs charge of £8

Gnarlyscoots · « **Reply #6 on:** August 08, 2011, 07:50 PM »

Without the rotor

Gnarlyscoots · « **Reply #7 on:** August 08, 2011, 07:50 PM »

Pretzel's collected, polished and fitted with SM mushy's

Starting to look like a bike now

Come on spokes, Z's to do and get on, eh Bendy

Gnarlyscoots · « **Reply #8 on:** August 08, 2011, 07:51 PM »

Z rims re-laced and true'd

Now guys, what tyres shall I put on ??

I have red Panaracers ?? Too much ??

Any ideas is cool

Gnarlyscoots · « **Reply #9 on:** August 08, 2011, 07:51 PM »

Rhubarb and Custard ?? ?? ??

Gnarlyscoots · « **Reply #10 on:** August 08, 2011, 07:53 PM »

Today guys, I have fitted a polished NOS Dia Compe Tech 6 locking lever with red Sharp lever cover for the back brake and a Gold KMC chain. I was going to fit my NOS Red and Chrome Izumi but have decided to save that for my Dp re-furb, Hmmm...........and Gold Shimano SX peds. Still hunting for decals from the states

I have also fitted some yellow dice valve caps

and a yellow savage cable and yellow Eagle II pads are in the post

Not sure if I will fit a front setup yet, I will see when the rest is done $:-\$

Pics now added, hope you like

What ya reckon so far guys ??

AKGOFF · « **Reply #11 on:** August 08, 2011, 07:59 PM »

Looking sweet Tel, despite my earlier reservations

Jaymz · « **Reply #12 on:** August 08, 2011, 07:59 PM »

Its crazy looking, i like, but i think you should go for a front brake set up as well as its a freestyler

Gnarlyscoots · « **Reply #13 on:** August 08, 2011, 08:05 PM »

Yer I know dude but it looks cool with just the one setup

I got the matching lever, Sharp lever cover, yellow savage cable and Mr Spen is sending me a polished 880 caliper for the front and a gold Tange Headlock

Eagle II's in the post (2 sets)

Gnarlyscoots · « **Reply #14 on:** August 08, 2011, 08:09 PM »

Quote from: AKGOFF on August 08, 2011, 07:59 PM

Looking sweet Tel, despite my earlier reservations

Cheers Bro

I will let you have a ride on the 4th Sept

Spen69 · « **Reply #15 on:** August 08, 2011, 10:26 PM »

Love it Terry, red and gold looks ace on a chrome bike

Polished 880 and the gold headlock are gonna lok the bollox on it bro - I'll get them to you once I've swapped all the bolts over to make sure it's a minter buddy

Gnarlyscoots · « **Reply #16 on:** August 17, 2011, 02:16 PM »

Thanx to a trade off with the Spenster, front polished 880, gold Tange headlock, DC polished Tech 6 with red lever cover and yellow savage cable now fitted to the front (and fook me guys, running that cable through the fork was fookin' hard work

)

Hope you all like and you will get to see it on the 4th Sept

Jaymz · « **Reply #17 on:** August 17, 2011, 02:51 PM »

sweet as, really came together, and you went with the front brake as well, looks great

mattuknc · « **Reply #18 on:** August 17, 2011, 03:02 PM »

Well done mate, that does look the business.

brettypeeps · « **Reply #19 on:** August 17, 2011, 03:09 PM »

great fusion of colours with awesome results

AKGOFF · « **Reply #20 on:** August 17, 2011, 06:03 PM »

Quote from: brettypeeps on August 17, 2011, 03:09 PM

great fusion of colours with awesome results

Couldn't agree more, the colours work superbly. Good work Tel, see ya on the 4th

Adam

Gnarlyscoots · « **Reply #21 on:** August 18, 2011, 02:50 AM »

Thanks guys

Appreciated

Just wish I could get hold of some decals for it

Taipan · « **Reply #22 on:** August 18, 2011, 11:08 AM »

I think it needs some f+f decals? do you know what they look like? like it tho

curtispro · « **Reply #23 on:** August 18, 2011, 11:26 AM »

Looking very nice and very different Terry, I will have a closer look on the 4th and just hope the sun is shining

Gnarlyscoots · « **Reply #24 on:** August 18, 2011, 11:47 AM »

Yer, I know what the decals look like and I have been trying to get hold of some through the Museum but to no avail

They seem to be very ellusive

I have even put in a request to get someone to take a set off and I will get them reproduced and supply them with a couple of sets

Oh well, the search goes on $:-\$

Author Topic: Schwinn Freeform build **FINISHED** (Read 4026 times)

mattuknc

curtispro

Author Topic: Schwinn Freeform build FINISHED (Read 4026 times)