Author Topic: Parts you don't need/won't use? (Read 2371 times)

Betty · « **on:** July 18, 2011, 09:06 PM »

We've all got parts stashed away, but what have you got that you know you'll never use but can't be arsed to throw out/sell?

Don't turn it into a for sale thread....

I'll start...

Frames... S&M LTF frames x2 one cracked, nowt wrong with the other
Macneil bibi cracked, headtube about to part company with downtube... scrap
Odyssey director forks
One GT profile crank arm (right)
Sprockets.... profile SS, ripsaw, trifan, TNT retro blade, Redline flight
Pedals... victor dx's x2, haro dx, S&M, DMR, Odyssey
Tyres.... too many, several pairs of comp 3's, Primos, KHE, duo
Brakes... Pitbull x2, ad990
Levers... DC tech 3, tech77
Pegs.... several part worn pairs
Number plates both used and unused
S&M seats, a few seat posts
A few incomplete headsets
One skyway wheel (front)
A few new school wheels
One peregrine semi pro hub (front)

Thats all i can think of without going for a look...

Why the fook do i keep all this shite....

What have you lot got that you should really get rid of?

Jaymz · « **Reply #1 on:** July 18, 2011, 09:11 PM »

Jesus betty, I wish i had that kind of stuff just hanging around!!

Ive just got a load of low end shlte that's all going to the tip when i move

few cheap frames,forks/bars from bikes i bought just for wheels
few opc's
chainwheels
loads of very used brake blocks!!!
brake cable outers that are just a bit too short for fronts!!
enough plastic pedals to make a raft out of
and its total shlte and really does need throwing in the bin, I bet i coundnt give it away!!

Betty · « **Reply #2 on:** July 18, 2011, 09:17 PM »

Jaymz my stash will be nowt compared to some...

There's probably more i've forgot....

brettypeeps · « **Reply #3 on:** July 18, 2011, 09:28 PM »

Just about cleared all mine

Whats left
901 set
165 mm Cranks
Power disk
44t Machine Sugino Black chain wheel
Suntour Headlocks
Tange Headlocks
Compe 3 Rainbow Fat
Shimano SX
Skyway Trick Nuts
Dia compe cables
Other odds and sodds

stidds · « **Reply #4 on:** July 18, 2011, 09:33 PM »

I have just gone through my spares and I have built 2 full bikes. One an oldschool freestyler (god knows where I picked up a freestyle frame) and a new school race bike. The only thing I bought was a pair of grips for the newschool.

I still have 4 or 5 boxes of spares, but small things like brake parts, washers etc. Oh and I have loads and loads of spokes and nipples.

Jaymz · « **Reply #5 on:** July 19, 2011, 11:06 AM »

Can I start dibbing. . . .

Ltf frame.. . . . . ..

(((sonic))) · « **Reply #6 on:** July 19, 2011, 11:10 AM »

I have a nos Bullseye "3 bolt" BB that is in transit on its way to me that i no longer need, went a dif route with my build, a set of nos Comp IV's in black that are a 2.125 (anyone have a 1.75 they want to swap...lol) a few plate #'s mostly Uni Twin Lines, I am sure there is some other stuff laying about......

AKGOFF · « **Reply #7 on:** July 19, 2011, 12:13 PM »

I have a riduculous amount of stuff which i don't want to get rid of because i like it and i'd like to use it but i think i know that its never gonna get used.

Yellow label Blue Comp 3s
Black Araya 7cs
Yellow Zs
Whitewall Tyres
20 x 1 3/8 Blue Pannies
Yellow Tuff 1s
Gold Ukai Speedlines
Prolite Frameset
Win Bars
Profile Champ Expert
Mini Profile Forks
Numerous Mini Stems
Numerous Chainrings
Sugino CT175 Crankset
Untold DC Tech 3s
Araya 20 x 2.125 in blue
Titan Mini frame

And god knows what else i should get rid of

Adam

Spen69 · « **Reply #8 on:** July 19, 2011, 12:39 PM »

This is deadly, we'll be pm'ing each other for more stuff!

Had an abundance of gear I just had to give away like odd hubs, knackered seatposts, bits of BB's and headsets, odd brake calipers I gave away and then found the other to make a pair, ones and threes of brake blocks waiting to find the last one, bolts that I have no idea if they fit Flights or not but I'm not gonna chance they don't, rusty spokes from stripping wheels down... The list is endless but I haven't stumbled onto a spare Haro Gen 1 or anything else worth more than fook all like I'd hoped I would ;-)

diesel · « **Reply #9 on:** July 19, 2011, 12:41 PM »

Hard to say without looking, but from memory here's stuff that surplus or just waiting for something

2x (in need of repair) Diamondback frames 1 looptail? / 1x silverstreak
GT Pedals
Various Chainrings
Retro 26 Comp III Tyres - Fat & Skinny
Copy Tech III Levers 1x pr black, 1x pr Silver
Retro SE padsets 1x Blue with White writing, 1x Black with Gold writing
tatty Black Kashimax aero
SE Troxel Seat & post combo
Zeronnine moto control in the pack
Se Proto plate
Profile Gas pedals
Profile XL stem 1 1/8th

other stuff

griff · « **Reply #10 on:** July 19, 2011, 12:50 PM »

2 odd wheels that came off my mid-school mongoose (hubs need work and I'm pretty sure one of them is 12mm)
Elina UL snakepost combo (available soon in for sale section

)
a superfox frame with a big dent in the downtube and a crack near the seat tube (also chrome is gone in places)
some mystery midschool levers

popedante · « **Reply #11 on:** July 19, 2011, 01:02 PM »

tons of stuff thats not built up ! , not on a bike today......but maybe tomorrow

sweetbeats · « **Reply #12 on:** July 19, 2011, 01:07 PM »

Few bits n bobs that I will be burying once I get round to digging a big hole.

Jaymz · « **Reply #13 on:** July 19, 2011, 01:17 PM »

Quote from: sweetbeats™ on July 19, 2011, 01:07 PM

Few bits n bobs that I will be burying once I get round to digging a big hole.

Like a squirrel stashing his nuts

brummie · « **Reply #14 on:** July 19, 2011, 01:20 PM »

dont you find that stuff you think you wont use, you get rid of
and then you need it

sods law

kev-s · « **Reply #15 on:** July 19, 2011, 03:35 PM »

im a hoarder of spares, u never know what u might need!!!!

if i remember correctly off the top of my head

new school
mcneil gary young frame
volume team forks with brake mounts
rnc titainuim seat clamp
profile titainuim 25t chainring
oddyssey jpeg light pegs x4
gsport plegs x2
fsa aheadsets x3
dmr v8 pedals x2
snafu pedals
dk magnisuim pedals with titainum axles
primo comet tyre
oddy 9 tooth driver
s&m hotseat
s&m thin seat
s&m padset x3
s&m meduim light bars
kmc super light chain
ybn half link chain

mid school
super pro rims x2
super pro phat jack hubs front and rear
quandro rear hub
gt cd chainring
ad990's incl all hardware x9 YES 9!!!!!!
tech 77's x3 pairs
kmc chain
izumi chain
gsport 14mm axle
chain tensioners x3 pairs
odi longneck grips
snafu pegs x2
shimano dx pedals
gt dropnose seat
gt seat clamp
shimano deore v brakes inc lever, front and rear
profile bearings and cups x1 set
profile bearings x2 pairs

plus 2 containers worth of headset bits, wheel nuts, washers, various sealed bearings, various nuts, parts of chains, springs and bolts off of brakes etc...

prob some more but i cant remember

Nicfred · « **Reply #16 on:** July 19, 2011, 03:53 PM »

Quote from: Jaymz on July 19, 2011, 11:06 AM

Can I start dibbing. . . .

Ltf frame.. . . . . ..

Ha ha i thought that

MartyC · « **Reply #17 on:** July 19, 2011, 04:30 PM »

I have quite a bit of stuff that I doubt will get used and some of it I would just like to keep but I can see a clear out coming of some bars, maybe a seat or two, a stem, maybe some tyres, a pair of Tuffs, pedals, brakes, but then again I may just get the urge to build another bike and won't have any parts if I do get rid!

Jaymz · « **Reply #18 on:** July 19, 2011, 04:35 PM »

Quote from: nicfred on July 19, 2011, 03:53 PM

Quote from: Jaymz on July 19, 2011, 11:06 AM
Can I start dibbing. . . .

Ltf frame.. . . . . ..

Ha ha i thought that

Thats fine mate, I want the cracked one anyway!!!!

In2 bmx · « **Reply #19 on:** July 19, 2011, 04:41 PM »

Quote from: Snav on July 19, 2011, 10:57 AM

I've nowt left

Yeah right ....

Ive got loads of bits .. i might just give them all away at MK

rollin72 · « **Reply #20 on:** July 19, 2011, 05:42 PM »

Quote from: Snav on July 19, 2011, 04:44 PM

Quote from: In2bmx on July 19, 2011, 04:41 PM
Ive got loads of bits .. i might just give them all away at MK

My Torker Bars better not be in there

woah woah woah back up a minute lumpy, he's been offering me those bars for over 12 months now

meticulous · « **Reply #21 on:** July 19, 2011, 06:08 PM »

2x loopy rippers and 2x quads, worth £200 now or so i've been told, just waiting for the moment....

the rest has been gone!

stu27 · « **Reply #22 on:** July 19, 2011, 06:31 PM »

Not a fat lot left in my stores
just a GHP seatpost
zeronine stadium plate
tech 4levers
copy levers
crud plugs
and a complete gt pro

In2 bmx · « **Reply #23 on:** July 19, 2011, 06:40 PM »

Quote from: rollin72 on July 19, 2011, 05:42 PM

Quote from: Snav on July 19, 2011, 04:44 PM
Quote from: In2bmx on July 19, 2011, 04:41 PM
Ive got loads of bits .. i might just give them all away at MK
My Torker Bars better not be in there

woah woah woah back up a minute lumpy, he's been offering me those bars for over 12 months now

didn't know you still wanted them Gaz with puting the Torker up for sale .

Your shifty face is in the front of the Q if you still want them .

rollin72 · « **Reply #24 on:** July 19, 2011, 07:59 PM »

dont want them now..they're shite

Author Topic: Parts you don't need/won't use? (Read 2371 times)

(((sonic)))

griff

sweetbeats

In2 bmx

In2 bmx