Pitch fork 1 1/8

[Munnyella]

Hi

Anyone got a compression bolt that'll fit a 1/18 set of pitchforks, they've  got a welded bit in, not a star nut.

Its quite big, I have a big sized one that has a cable hole in, but this is bigger.

No point putting this in the wanted section....

Cheers

MM

[HEYWOOD BMX]

 You can buy S&M ones seperately or use the bolt from a freestyle starnut set.
http://www.sourcebmx.com/product/forks/sm-fork-top-cap/13266.shtml

http://www.sourcebmx.com/product/forks/dia-compe-ahead-cap-star-nut-set/15288.shtml

 I prob have a spare Diatech bolt and topcap if you can wait until I can look tomorrow?

[Munnyella]

You can buy S&M ones seperately or use the bolt from a freestyle starnut set.
http://www.sourcebmx.com/product/forks/sm-fork-top-cap/13266.shtml

http://www.sourcebmx.com/product/forks/dia-compe-ahead-cap-star-nut-set/15288.shtml

 I prob have a spare Diatech bolt and topcap if you can wait until I can look tomorrow?

I've got a freestyle one from a GT or Mongoose with a welded starnut, but the s&m one is bigger!

MM

[HEYWOOD BMX]

 Mine should fit-I have one here fitted to a set of older Pitchforks.There is not a standard size for all compression bolts,PM me and I can post it to you FOC.

[kev-s]

is there not a local nut and bolt shop near you that u can take the forks to and get them to try a few bolts out?

thats what i had to do with my pitchforks on my red holmes, unfortunately i cant remember the thread and pitch size