Author Topic: Raleigh team aero pro, with a few changes (Read 6734 times)

Bowie75 · « **on:** June 29, 2011, 11:39 AM »

I hope you like it

Parts list

Koizumi frame
Tange forks
Win cro-mo bars
Tange Grips
Tange 125 Headset
Tange bottom Bracket
Custom M Pedals
Sugino chainring and spider
Sugino clamp
Sugino Stem
Ukai speddlines with suzue sealed hubs
Cheng shin 1.75 tyres
Dia compe cable clips, made in japan
85 Dia compe mx1000
Dia Compe Tech 3 Lever
Raleigh Kashimax copy seat

Im just waiting on a kashimax seat decal and new SR End Caps for the pedals, which should be in the post

I stripped the frame back to bare metal and painted it myself.

Thanks for looking and if anyone has a kashimax seat decal for sale please let me know.

1mancity2 · « **Reply #1 on:** June 29, 2011, 11:45 AM »

Looking good, get some rubber ends on those Chain tensioners

crazycraig · « **Reply #2 on:** June 29, 2011, 12:41 PM »

Clean Example !

monkian · « **Reply #3 on:** June 29, 2011, 12:51 PM »

Good looking bike that

Those bars might need pulling back a tad

TELLIS302000 · « **Reply #4 on:** June 29, 2011, 01:11 PM »

Nice ride man!

Thats a TANGE FRAME though not a Koizumi.

Jaymz · « **Reply #5 on:** June 29, 2011, 01:35 PM »

nice one

those lugs on the custom M fleckies are beasts arent they!!!

DJL · « **Reply #6 on:** June 29, 2011, 01:36 PM »

Quote from: TELLIS302000 on June 29, 2011, 01:11 PM

Nice ride man!

Thats a TANGE FRAME though not a Koizumi.

some of the ap's were koizumi, stamped on the inside of the rear drop out.....

TELLIS302000 · « **Reply #7 on:** June 29, 2011, 01:53 PM »

Quote from: DJL on June 29, 2011, 01:36 PM

Quote from: TELLIS302000 on June 29, 2011, 01:11 PM
Nice ride man!

Thats a TANGE FRAME though not a Koizumi.

some of the ap's were koizumi, stamped on the inside of the rear drop out.....

Yes i know but those are Tange rear dropouts.

I just sold a MK2 cromo burner that was Koizumi made and the dropouts are totally different.

Also Tange made the MK1 Cromo Burner and Koizumi made the MK2 Cromo burner, so maybe this applies to the Aero Burner too?

If its a Koizumi it will be stamped on the inside of the rear left hand dropout and it will also have the baseball symbol.

Antony

brettypeeps · « **Reply #8 on:** June 29, 2011, 01:56 PM »

What ever make the frame is it looks a lovely build

DJL · « **Reply #9 on:** June 29, 2011, 01:57 PM »

pretty sure the rear drop outs are the same on both the tange and koizumi ap's......

TELLIS302000 · « **Reply #10 on:** June 29, 2011, 02:00 PM »

Quote from: DJL on June 29, 2011, 01:57 PM

pretty sure the rear drop outs are the same on both the tange and koizumi ap's......

Fair enough.

Maybe im wrong then.

A

rad_pitt · « **Reply #11 on:** June 29, 2011, 02:01 PM »

Antony, Koizumi made Aero Pro's, identical to those made by Tange

they were made in smaller numbers, but it's an identical frame set.

Nice clean build

TELLIS302000 · « **Reply #12 on:** June 29, 2011, 02:04 PM »

Quote from: rad_pitt on June 29, 2011, 02:01 PM

Antony, Koizumi made Aero Pro's, identical to those made by Tange they were made in smaller numbers, but it's an identical frame set.

Nice clean build

Cool, fair enough.

Cleared that up then.

rick1970 · « **Reply #13 on:** June 29, 2011, 02:07 PM »

Tiz a nice nice build is that cracking paint job too well done

pickle · « **Reply #14 on:** June 29, 2011, 02:09 PM »

nice job there, bike looks sweet

Bowie75 · « **Reply #15 on:** June 29, 2011, 02:14 PM »

Thanks for all your positive comments and pointers guys, I will take them all on board

1mancity2 · « **Reply #16 on:** June 29, 2011, 02:57 PM »

If you need some rubbers for your end er I mean chain tensioners! give me a pm with your address and I will send you some

Bowie75 · « **Reply #17 on:** June 29, 2011, 05:20 PM »

Quote from: 1mancity2 on June 29, 2011, 02:57 PM

If you need some rubbers for your end er I mean chain tensioners! give me a pm with your address and I will send you some

Thanks for your kind offer

, but I'm pretty certain I have some, so I'll dig them out and put them on for all the finishing touched, like new SR end caps and seat decal.

Mattdub · « **Reply #18 on:** June 30, 2011, 08:59 AM »

Lookin' tidy

NORTY40 · « **Reply #19 on:** June 30, 2011, 09:31 AM »

Nice build mate , do like the teams

Looks like you have done a cracking job on the frame too , striping the Blue to the right angle isn't the easiest of tasks , just done one myself

Glynnyboy · « **Reply #20 on:** June 30, 2011, 12:37 PM »

Nice one . That looks ready to go. I do like a team with spokes.
Hat off to you on the paint job too mate.

Nice one too Tom ,a young fella joining the hobby that does his homework.

oldboyburner · « **Reply #21 on:** July 01, 2011, 09:55 PM »

nice job fella i have a spare pair of kashi aero decals some were you can have if i find them just pm me details

Bowie75 · « **Reply #22 on:** July 02, 2011, 01:43 PM »

Quote from: oldboyburner on July 01, 2011, 09:55 PM

nice job fella i have a spare pair of kashi aero decals some were you can have if i find them just pm me details

Thanks for your kind offer obb, it's the rear kashimax decal I'm after.

spyderpit13 · « **Reply #23 on:** July 03, 2011, 11:24 PM »

mm,,, like the bike, lovin that seat..i need... i need...

ronster · « **Reply #24 on:** July 04, 2011, 03:36 PM »

Tats real nice that dude

Author Topic: Raleigh team aero pro, with a few changes (Read 6734 times)

Bowie75

1mancity2

monkian

DJL

DJL

rad_pitt

Bowie75

1mancity2

Bowie75

oldboyburner

Bowie75

spyderpit13

ronster