Author Topic: Anyone ever used this on chrome ??? (Read 478 times)

Jamroll · « **on:** May 20, 2011, 10:58 AM »

Everyone seems to use peek, but was wondering if anyone had used this stuff

Seem to get some good reviews etc on the web

Just wondering if anyone on here had used it?

http://www.autopia.org/reviews/productDetail.html?product=meguiars_nxt_generation_all_metal_polysh&vendor=meguiars

Cheers
Al

MartyC · « **Reply #1 on:** May 20, 2011, 11:40 AM »

Yep, I used on my Robinson RSR after the OA bath; it's not too agressive and brings up chrome pretty well.

Jamroll · « **Reply #2 on:** May 20, 2011, 11:43 AM »

Quote from: MartyC on May 20, 2011, 11:40 AM

Yep, I used on my Robinson RSR after the OA bath; it's not too agressive and brings up chrome pretty well.

Did it leave any protective layer over theframe after...the reason i ask is i need to polish up before the candy laqour goes over the top again...but i dont know if the protective layer would react with the laqour or dull the finish $:-\$

MartyC · « **Reply #3 on:** May 20, 2011, 11:49 AM »

Quote from: jamroll on May 20, 2011, 11:43 AM

Quote from: MartyC on May 20, 2011, 11:40 AM
Yep, I used on my Robinson RSR after the OA bath; it's not too agressive and brings up chrome pretty well.

Did it leave any protective layer over theframe after...the reason i ask is i need to polish up before the candy laqour goes over the top again...but i dont know if the protective layer would react with the laqour or dull the finish $:-\$

They claim it does, whether it actually does I don't know but I would think a wipe over with pre-paint would remove it and still leave it shiney; is this for the CW?

Jamroll · « **Reply #4 on:** May 20, 2011, 11:52 AM »

Quote from: MartyC on May 20, 2011, 11:49 AM

Quote from: jamroll on May 20, 2011, 11:43 AM
Quote from: MartyC on May 20, 2011, 11:40 AM
Yep, I used on my Robinson RSR after the OA bath; it's not too agressive and brings up chrome pretty well.

Did it leave any protective layer over theframe after...the reason i ask is i need to polish up before the candy laqour goes over the top again...but i dont know if the protective layer would react with the laqour or dull the finish $:-\$

They claim it does, whether it actually does I don't know but I would think a wipe over with pre-paint would remove it and still leave it shiney; is this for the CW?

Yeah it is marty, gonna try and remove some of those marks

Jamroll · « **Reply #5 on:** May 24, 2011, 04:26 PM »

So can anyone tell me wot will remove fine scotch pad marks form chrome???

BENDYCAT ELEVENTEEN · « **Reply #6 on:** May 24, 2011, 07:23 PM »

when i used peek on those forks to show how they could come up, at the end i used a jay cloth and water and rubbed in peek into the cloth and a drop more water so it was wet but not dripping wet - then just gentle rub in lines down the tubing

i would test the method on some thing else before you try on the frame - the answer in to go gently

don't know if this helps mate

pm me if you want to call me about it and further details or even coming to see you at work as i need to sort my laptop out in farnham

cheers B

Jamroll · « **Reply #7 on:** May 24, 2011, 08:32 PM »

Quote from: BENDYCAT ELEVENTEEN on May 24, 2011, 07:23 PM

when i used peek on those forks to show how they could come up, at the end i used a jay cloth and water and rubbed in peek into the cloth and a drop more water so it was wet but not dripping wet - then just gentle rub in lines down the tubing

i would test the method on some thing else before you try on the frame - the answer in to go gently

don't know if this helps mate pm me if you want to call me about it and further details or even coming to see you at work as i need to sort my laptop out in farnham

cheers B

PM sent dude