Author Topic: BOTM May 2011 - Vote Results (Read 68000 times)

rollin72 · « **Reply #1 on:** May 06, 2011, 07:43 PM »

1980 DB Large Pro f+f's powdered by SBD
DB bars
Oakley2 grips
SR stem restored
DC tech2 lever/890 brake restored..skyway tuff pads
Suntour seatclamp restored
Nos fluted seatpost
Nos Kashi MX
Sugino DB cranks restored/Sugino chainring
SR pedals
ACS Z rims and ACS Stoker hubs restored and built by me decals by Del
DB IRC tyres
Decals by Retrospect BMX
Radpads by the padman

nice1 Gaz

AKGOFF · « **Reply #2 on:** May 07, 2011, 04:44 PM »

Just finished this build today and took it out for a quick cruise, it rides absolutely beautifully.

83 SE Racing Quadangle
Unstamamped Landing Gear
Mint 180mm, Single pinch, full wrap, double dimple spindle 401 Flights
NOS Sugino Chaing ring 44T
NOS Hutch Pro Pedals
Genuine NOS Revcore polished seat post clamp
SE Seat post
NOS Kashimax Aero and KSM Guts
Polished DC MX1000 & Tech 3
NOS Skyway Pro Pads & polished Fins
NOS DC Cable clips
Mint SE Power Wing bars
NOS AME Rounds (Bubble font)
NOS Tioga Bear Trap headset
NOS Suntour Headlock
Mint DK Pro Stem
NOS Ukai Speedlines with Shiny sides
Restored Hutch Ti-Mag Hubs
NOS Rainbow Label Comp 3 Fat/Thin combo

Cheers

Adam

xGoose · « **Reply #3 on:** May 07, 2011, 05:00 PM »

stepping away from the Gooses for this month with a kuwi

nos Kuwi Laserlite KZ-83 f+f
nos Shimano DX cranks
nos Shimano DX pedals
Shimano DX seatpost
Vector 8 bars
DC brakes with tech 3s
nos Ukai rims on Sunshine hubs
Tange 125 headset
nos Elina lightning bolt seat
nos Knarler Knobby fat / skinnies
nos gold Tuf Neck stem
nos Suntour seat clamp
nos Oakley B1-b grips
restored Zeronine plate

And the shirt has been personally signed by Takashi Kuwahara!

In2 bmx · « **Reply #4 on:** May 08, 2011, 06:33 PM »

1978 Robinson

Parts list

78 Robinson Frame & Forks
79 Schwinn sting Bars
78 Cook bro Slant line Stem
79 NOS Weinmann 890 with lever and cable
79 Scott Mathauser Brake shoes
77 NOS Oakley 1 Grips
79 NOS MX2 Headset
78 Shimano 600 cranks
78 Bob Reedy spindles Demco Futura X cages
NOS Tange euro bb
Gen 1 Araya 7B rims
Gen 1 Phil wood hubs
NOS cheng shin tyres
79 Gen 1 excaliber Seat clamp
NOS DID Chain
Repo Pad set
78 Fluted seat post
NOS Kashi Super pro

More Photos http://www.radbmx.co.uk/forum/index.php'topic=126105.0

Carl

Robbo · « **Reply #5 on:** May 09, 2011, 06:06 PM »

1989 Haro Master Bashguard

NOS Haro Kneesavers
NOS AME Grips
NOS Tech 77's
NOS Group 1 Stem
NOS Tioga Headset
NOS Dia Compe Nippon Caliper
NOS Odyssey Pitbull
NOS Viscount Dominator
NOS Haro Fusion Disc
NOS Peregrine HP Tyres
NOS Peregrine Semi Pro 48's
NOS Haro Pegs
NOS Fusion Seat Clamp
Redline 3 Piece Crank and BB
Odyssey Slic Cables
Odyssey Gyro
Victor Pedals
Decals from teamharo on the museum

MartyC · « **Reply #6 on:** May 12, 2011, 01:29 PM »

Don't normally do this but here goes...

1984 Robinson RSR Survivor

Parts list:

Only parts diffrences to above spec are new Oakley 0.5's, a TerryCable and a Sachs Sedis 3/32 chain

Pics:

Night Rider · « **Reply #7 on:** May 18, 2011, 10:47 PM »

Here is my Mk1 Super Tuff. I know I know.... it's not a high spec race machine but I put my guts into it over a year and getting some of the parts namely grips and Tuff pads dragged on for months. All casting and molding marks have been filed and smoothed inc inside the rough cast parts of the chainring, opc smoothed and all brake parts have no casting marks.
Work done
F,F&B Re-Chromed and re-superchromed.
Skyways restored. (the axles alone are NOS).
Spider restored.
Saddle restored.
Flecci restored.
Weinmanns brakeset restored,
Sugino 40t restored.
SR stem, OPC, bb, headset, seatpost clamp cleaned polished and chromed.
Sugino Chainring bolts cleaned polished.
Mint Viscount grips inc foam.
Cheng Shin Comp III Combo.
NOS Raleigh cables.
NOS seat guts.
NOS Black Skyway Tuff Pads.
NOS Sugino Pedals.
NOS seatpost.
Repro Decals & pads.
New KMC Chain.

bert4142 · « **Reply #8 on:** May 19, 2011, 05:19 PM »

Well here is my 1st BOM entry, this has taken a while to get all the parts together and im so pleased with the finished result.

1986 Hutch Trickstar F&F - powdered by C4 labs
Hutch Ladder bars with tange grips
Tioga Beartrap headset
Polished H Stem
Polished hutch seatclamp
Kashimax aero seat (original)
Polished Oddy system 2000 brake set and cables( NOS )
Chrome sugino chain ring and polished disc
Redline twin pinch flights
Hutch pedals
Oddy barefeet tyres
Primo rims with blue spokes and polished hubs
Chrome dice caps with blue spots

wildon · « **Reply #9 on:** May 22, 2011, 07:53 PM »

It's a first entry for me too ..

1984 JMC Darrell Young Frame & Forks
JMC Darrell Young Bars
JMC Laid Back Long Seat Post
JMC Padset
ESP Stem
Shot Gun 2 Seat
Chrome Araya 7x with Son-Lite Hubs, Chrome Spokes with Red Nipples
Blue/Grey Comp 3's
Tange 320 Headset
Shimano DX Crank Set
Titron Pedals
Ame' Unitrons
DC mx900 & Tech 3
DC Rear Cable Dated 84

pickle · « **Reply #10 on:** May 24, 2011, 04:44 PM »

might as well make up the numbers, built this up a month or so ago but only just got the finishing decals for the LG's.

BENDYCAT ELEVENTEEN · « **Reply #11 on:** May 26, 2011, 12:06 PM »

late entry:

MT RACING SILVER FOX 1984

A mate wanted a bmx again and found this down a dump, asked me if i could sort it out for him to ride.
This was in a right state when i got it and we stripped it down in the rain (hence no pic's before hand - fool

I said i will get it ready for him to ride
I started to see that it could be some thing sweet - grease and dirt removed and the chrome was ok under it - polished it to death and got lucky with being able to leave the original decal on there - said he wanted mags and also some grippy pedals (hence not originals, but will replace them now)
To cut a long story short it turn out very sweet and most original parts - i showed him and he loved it - he still had to pay for the parts, but i gave him free labour - two months later and he still hadn't paid - phoned him and he went off like a three year old having a paddy - he told me to go f**k myself and i could have the bike back to pay for the parts - i still don't know why he went off, money - bills - wife ? i just don't know, i guess was he spent too much on other things and had burned himself
Well the bike turn up at my place - he never spoke to me again ?
I had enjoyed building this bike and was sorry to let it go - it came back - true love

it just goes to show that you can build a bike on a budget - just clean and restore the original parts and add a couple of things to bring it up to a sweet ride - it doesn't have to be a grail of a bmx - the cheap one's that we started off on can be just as good as the big stuff and enjoyed just as well

cheers B

cheap, sweet and hard to beat - MT RACING SIVER FOX 84'

PK.RIPPER · « **Reply #12 on:** May 26, 2011, 05:02 PM »

2007 Bent down tube GT retro PERFORMER / Eddie fiola rep (my everyday rider)

This is what the bike looked like when i bought it

This is how it looks now after having Â£748

thrown at it

Modified 2007 GT Performer frame and forks,All cable guides,brake position lugs and gyro brackets on the head tube chopped off to make it look old school.
NOS 1985 GT pro Performer bars
Dia Compe MX1000 brake calipers
NOS Dia Compe levers
NOS Suntour seat clamp
Kink Stem
Kink head set
Skyway tuffs
Skyway pads
NOS Odyssey exaliber crank
NOS Tuf-Neck power disc and chainring
NOS Kashimax Handler seat
GT seat post
NOS Shimano pedals, (Gold for show, silver for riding)
GT pad set
Rare Clarks black "Thunder Bolt" brake cables
Ame "Tri" grips
NOS Haro Freesyle tyres
NOS Sharp Bottom Bracket Boot
NOS Bell chain
NOS Suntour freewheel

And yes before anybody says about them i have now removed the little red rubber bands off the brake ajusters

plus now the bike has a gold Tuf-neck chain ring fitted to the Gold Tuf-Neck power disc

Glynnyboy · « **Reply #13 on:** May 30, 2011, 12:52 AM »

RALEIGH RACING
R7000 CRUISER

Raleigh R7000- frame
Tange- forks
Raleigh Cruiser- bars
Tange 303- headset
Tuff Neck- Stem
Oakley B1 B- grips
Dia-Compe- brakes
Redline flight- cranks
Suntour beartrap- pedals
Shimano DX- seatpost
Araya 7X- rims
Suntour LFCP- hubs
Izumi- chain
Cheing Shing Comp3- tires

pickle · « **Reply #14 on:** June 01, 2011, 08:23 PM »

Will sort the poll out on Saturday morning

pickle · « **Reply #15 on:** June 04, 2011, 04:52 PM »

voting now open guys.......fill ya boots!!

ED209 · « **Reply #16 on:** June 04, 2011, 05:08 PM »

yeah man... need at least 5 votes

gonna have to go with what I committed to before I saw them all

but Robbos Master, Bretts DP and Berts Trickstar are all

but I think Snav's Quad should win a 'Spirit of RAD' Special prize for what it represents

AKGOFF · « **Reply #17 on:** June 04, 2011, 05:12 PM »

I should really vote for mine so it gets at least 1 vote but Terry, your JMC is too nice for me not to vote for yours mate.

Adam

pickle · « **Reply #18 on:** June 04, 2011, 06:08 PM »

For me it was the raleigh racing cruiser

Jaymz · « **Reply #19 on:** June 04, 2011, 10:15 PM »

78 robbo for me, that is just mouth wateringly good, and a great piece of early bmx history kept alive for future generations to admire

Clean · « **Reply #20 on:** June 04, 2011, 10:37 PM »

Torn.....

So many honies.....

My teen dream that is Gaz's DB Pro Large

The white elegance of Peeps' DP FB

The simple, clean lines of Carl's '70s build

The memories that Bendycat's MT Fox evokes

Night Rider proving that you CAN polish a turd

But for me, the winner is Snav... because it is RAD's BOTM, not just Snav's. A stunning testament to the beauty of OSBMX and the spirit of the RAD community.