FINALLY built an old dirtbike -FINISHED-

[SaMAlex]

Bent lever anyone
http://cgi.ebay.co.uk/BMX-BRAKES-Tech-77-Dj-Lever-/160608247222?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item2564ff5db6#ht_500wt_1180

Great, NOW you come in with somewhere to get them! 

I had a bent lever on another bike which didnt really need it so it all worked out anyway

[SaMAlex]

I got a bit more done to this bike.

I swapped over the profile cranks for a One Piece Crank, and put some 1/2" GT pedals I had. O.P.C seemed much better on this bike, and they actually hold the chainring tigher (cos it bolts to the crank in the middle) so were better when using a grind disk.

Ive got a different front wheel i want to use but i need to get the spindle free'ed up. Then it'll be all done.

[lk_97]

I LOVE this bike, it looks so much like an early 90's bike, it just goes so well, I think my next bike will be an old s&m now. Also, if you wanna get rid of a sprocket pocket let me know!

[SaMAlex]

One of the cool things about this bike is its an early mk 2, brakeless dirtbike, but its the same as my second S&M. Same colour (well, mine was lighter but still purple) same decal set, same frame. Just what i was after. I always ran (run) a dialed setup with 2 working brakes and stiff wheels but I used to ride with loads of people who had bikes similar to this. Loads of fun.

Im very tempted to take it down the local Ledge-etarian skatepark and have a few sproket pocket grinds but they wear down pretty fast 

[lk_97]

You should take it down the skatepark out of interest how much would a sprocket pocket cost?

[Jaymz]

loving it alex, looks 'ready' t go out and show off. Glad you're changing the front wheel over, spokes all the way. Cracking, very envious

[SaMAlex]

out of interest how much would a sprocket pocket cost?

Very hard to say, I dont think they come up often. I have the one on this bike, a black one still in the packet, and a used white one 

Glad you're changing the front wheel over, spokes all the way. Cracking, very envious

Im changing the front wheel .... to another black tuff  .
This one is a bit new and clean. Ive got another that is messier (and ally hub'ed). Much better

[Jaymz]

Ah well in my mind its wearing a pair of spokes!!!! I am really craving some early S&M action, I may have to flog one of my new schools to fund one

[lk_97]

out of interest how much would a sprocket pocket cost?

Very hard to say, I dont think they come up often. I have the one on this bike, a black one still in the packet, and a used white one 

Glad you're changing the front wheel over, spokes all the way. Cracking, very envious

Im changing the front wheel .... to another black tuff  .
This one is a bit new and clean. Ive got another that is messier (and ally hub'ed). Much better

Wanna sell the white one? 

[SaMAlex]

Wanna sell the white one? 

I dont even wanna sell the black one, and i have 2 of them 

[lk_97]

Wanna sell the white one? 

I dont even wanna sell the black one, and i have 2 of them 

If you ever see one, give me first shout then mate

[SaMAlex]

Some say I keep way to much junk 

The 4 spoke sprocket pocket is one i made out of a chopping board. If you look close you can see the flight ring that's drilled to take it

[Dannywhac]

Wurrrrr  - got a thing for sprockets K'in 'ell that Whippet's crank bolt holes taken a beating