Author Topic: 1983 Chrome Aero Pro (Read 8277 times)

rad_pitt · « **on:** April 24, 2011, 07:12 PM »

Hello all,

I should probably introduce myself as I'm a bit of a newb round these parts.. I've been a member for a while now, but the forum is so vast I often get lost

I've also kind of guaged you aren't all that keen on Burners, so don't be too damning

This is my first build, I wasn't even around when these bikes were in production - but there's an affinity with my home town, Nottingham.

Anyway here it is:

Parts rundown:

F&F original chrome
AP V bars (Re-chromed)
Re-pro Raleigh pad set (esemdesign)
Tange 300 headset (recoated black)
NOS OGK Mach grips
NOS DC Tech 2 lever
Re-pro DC Cable
NOS DC Cable Clips
NOS Red Kashimax Aero (dyed black)
Kashimax seat guts (re-chromed)
Koizumi seat post (re-chromed)
Suntour seat clamp (re-anno'd)
Sugino 175mm one piece crank (re-chromed)
Sugino Spider (re-chromed)
Sugino chainring bolts (re-chromed)
Sugino 44t chain wheel (re-anno'd)
NOS SR Custom M pedals (recoated black)
NOS black Suntour Power stem
DC MX900 Caliper recoated, all hardware chromed, new quick release fitted with NOS Weinmann adjuster
Araya Aero wheels (polished), laced to Suntour sealed bearing hubs (original anno)
Re-pro Comp III Yellow label tyres (fat/ thin combo)

I'll hopefully spend a bit more time on here now after I've plucked up the minerals to post

Cheers,
Tom

stu27 · « **Reply #1 on:** April 24, 2011, 07:17 PM »

stunning build that is

QUADROPHENIA · « **Reply #2 on:** April 24, 2011, 07:25 PM »

welcome aboard chap, i am afraid we try to do only bmx bikes here so if you could just pop that in a skip

BTW beardy will be here to defend it in a minute, he collects that tat so is a tad mental

rad_pitt · « **Reply #3 on:** April 24, 2011, 07:31 PM »

Quote from: QUADROPHENIA on April 24, 2011, 07:25 PM

welcome aboard chap, i am afraid we try to do only bmx bikes here so if you could just pop that in a skip

BTW beardy will be here to defend it in a minute, he collects that tat so is a tad mental

I've got no chance have I? I'll fly the Burner flag with Dave and Glynn

cheers for the welcome buddy.

@ Stu, cheers for that mate, really appreciate it

RATTY · « **Reply #4 on:** April 24, 2011, 07:34 PM »

wheres all this skip fodder coming from?

LOL welcome aboard mate

rad_pitt · « **Reply #5 on:** April 24, 2011, 07:43 PM »

Quote from: RATTY on April 24, 2011, 07:34 PM

wheres all this skip fodder coming from?

LOL welcome aboard mate

full of banter over here! Cheers for the welcome mate

beard1973 · « **Reply #6 on:** April 24, 2011, 10:22 PM »

Quote from: QUADROPHENIA on April 24, 2011, 07:25 PM

welcome aboard chap, i am afraid we try to do only bmx bikes here so if you could just pop that in a skip

BTW beardy will be here to defend it in a minute, he collects that tat so is a tad mental

And here I am.... the DEFENDER of the Burner Faith...

Pete loves these bikes... he's been to more Burner Bash events than any other RADBMX member...

He claim's its to pick up cheap bits and pieces that us uneducated Burner Collectors throw away.. but I've seen the look in his eye when he's surrounded by all that Nottingham High Tensile Steel....

rad_pitt · « **Reply #7 on:** April 24, 2011, 10:49 PM »

Quote from: beard1973 on April 24, 2011, 10:22 PM

Quote from: QUADROPHENIA on April 24, 2011, 07:25 PM

welcome aboard chap, i am afraid we try to do only bmx bikes here so if you could just pop that in a skip

BTW beardy will be here to defend it in a minute, he collects that tat so is a tad mental

And here I am.... the DEFENDER of the Burner Faith...

Pete loves these bikes... he's been to more Burner Bash events than any other RADBMX member...

He claim's its to pick up cheap bits and pieces that us uneducated Burner Collectors throw away.. but I've seen the look in his eye when he's surrounded by all that Nottingham High Tensile Steel....

Pete, I'll even let you have a go buddy

RATTY · « **Reply #8 on:** April 24, 2011, 10:57 PM »

Quote from: rad_pitt on April 24, 2011, 10:49 PM

Quote from: beard1973 on April 24, 2011, 10:22 PM
Quote from: QUADROPHENIA on April 24, 2011, 07:25 PM

welcome aboard chap, i am afraid we try to do only bmx bikes here so if you could just pop that in a skip

BTW beardy will be here to defend it in a minute, he collects that tat so is a tad mental

And here I am.... the DEFENDER of the Burner Faith...

Pete loves these bikes... he's been to more Burner Bash events than any other RADBMX member...

He claim's its to pick up cheap bits and pieces that us uneducated Burner Collectors throw away.. but I've seen the look in his eye when he's surrounded by all that Nottingham High Tensile Steel....

Pete, I'll even let you have a go buddy

You sure, Pete weighs about 32 stone, and high tensile steel crumbles with about 12 stone on em

Love ya really Peter

QUADROPHENIA · « **Reply #9 on:** April 25, 2011, 05:57 AM »

Quote from: beard1973 on April 24, 2011, 10:22 PM

Quote from: QUADROPHENIA on April 24, 2011, 07:25 PM

welcome aboard chap, i am afraid we try to do only bmx bikes here so if you could just pop that in a skip

BTW beardy will be here to defend it in a minute, he collects that tat so is a tad mental

And here I am.... the DEFENDER of the Burner Faith...

Pete loves these bikes... he's been to more Burner Bash events than any other RADBMX member...

He claim's its to pick up cheap bits and pieces that us uneducated Burner Collectors throw away.. but I've seen the look in his eye when he's surrounded by all that Nottingham High Tensile Steel....

i only go cos you put a good show on dave

and to kick afew burners over obviously

Mattdub · « **Reply #10 on:** April 26, 2011, 10:42 AM »

Lookin' good Tom

brummie · « **Reply #11 on:** April 26, 2011, 10:53 AM »

absolute stunner
well done mate

oldskooldayz · « **Reply #12 on:** April 26, 2011, 11:09 AM »

it will be called raleighradbmx soon at this rate

no only joking mate lovely bike that is, well done, and nothing wrong with an aero pro in my books

i must have jumped many a ramp back in the 80's on one of them like most of us

NORTY40 · « **Reply #13 on:** April 26, 2011, 12:05 PM »

Cracking first build that Tom

What's the next one to be

rad_pitt · « **Reply #14 on:** April 26, 2011, 02:15 PM »

Cheers lads, really appreciate all the nice comments

Quote from: NORTY40 on April 26, 2011, 12:05 PM

Cracking first build that Tom

What's the next one to be

I have an 84 blue max on the go, but not sure how far I want to go with it.. After seeing Glynn's Team Rampar, I'm itching to get an early BMX products frame. Maybe a Motomag. I'm not sure