Author Topic: Hutch project (Read 2750 times)

Pooch · « **on:** April 14, 2011, 10:07 PM »

Will be stripped down to it's birthday suit and sent to Dan for a candy red!!! Nice

HUTCHMAN · « **Reply #1 on:** April 14, 2011, 10:10 PM »

really?chrome don't look that bad! mind you,i do like the sound of the red with chrome decals.

Pooch · « **Reply #2 on:** April 14, 2011, 10:15 PM »

It's a good picture.. It could be a survivor though.. But always wanted candy apple red Hutch.

HUTCHMAN · « **Reply #3 on:** April 14, 2011, 10:24 PM »

it does look ok!! survivor??

Betty · « **Reply #4 on:** April 14, 2011, 10:25 PM »

Get the autosol out, looks like it'll clean up nice...

Such a shame to get rid of its og chrome...

Pooch · « **Reply #5 on:** April 14, 2011, 10:29 PM »

Quote from: HUTCHMAN on April 14, 2011, 10:24 PM

it does look ok!! survivor??

Flaking on loops near drop outs. Forks have quite a bit of rust on them...and i like red

HUTCHMAN · « **Reply #6 on:** April 14, 2011, 10:32 PM »

thats fair comment. i do like the sound of the re work though. dont listen to us though John,its your frame.

Pooch · « **Reply #7 on:** April 14, 2011, 10:38 PM »

Thanks mate...

GTnumber1 · « **Reply #8 on:** April 14, 2011, 11:28 PM »

whos stripping the chrome mate?

hunterdubber · « **Reply #9 on:** April 14, 2011, 11:31 PM »

Hey Poochy

Stick with the Candy red with Chrome or White decals ,,

They look amazing

hunterdubber · « **Reply #10 on:** April 14, 2011, 11:32 PM »

Quote from: stevencosta on April 14, 2011, 11:28 PM

whos stripping the chrome mate?

Do you need to Costa ?

SBD will just silver powdercoat base straight on to the chrome ,, then use a translucent red powdercoat over the top ,,I reckon

wildon · « **Reply #11 on:** April 14, 2011, 11:41 PM »

Quote from: Hunterdubber on April 14, 2011, 11:32 PM

Quote from: stevencosta on April 14, 2011, 11:28 PM
whos stripping the chrome mate?

Do you need to Costa ?

SBD will just silver powdercoat base straight on to the chrome ,, then use a translucent red powdercoat over the top ,,I reckon

Don't need the silver base coat if the chrome is staying do ya? I had blue straight over a chrome TS... Mind you you could peel it right off

hunterdubber · « **Reply #12 on:** April 14, 2011, 11:47 PM »

Terry ,, you haven't seen the frame up close ,, I have when it was J.T racings

it's not like one of your show stoppers

The base powder will help hide the original finish imperfections and wear .

No worries about that though as Dan will do the magic on it and probably double the frames price/value

GTnumber1 · « **Reply #13 on:** April 14, 2011, 11:50 PM »

Quote from: Hunterdubber on April 14, 2011, 11:32 PM

Quote from: stevencosta on April 14, 2011, 11:28 PM
whos stripping the chrome mate?

Do you need to Costa ?

SBD will just silver powdercoat base straight on to the chrome ,, then use a translucent red powdercoat over the top ,,I reckon

got a frame that needs de chroming and not sure whos good out there to trust without fooking it up $:-\$

hunterdubber · « **Reply #14 on:** April 14, 2011, 11:55 PM »

Quote from: stevencosta on April 14, 2011, 11:50 PM

Quote from: Hunterdubber on April 14, 2011, 11:32 PM
Quote from: stevencosta on April 14, 2011, 11:28 PM
whos stripping the chrome mate?

Do you need to Costa ?

SBD will just silver powdercoat base straight on to the chrome ,, then use a translucent red powdercoat over the top ,,I reckon

got a frame that needs de chroming and not sure whos good out there to trust without fooking it up $:-\$

The de chroming process is easy ,,isn't it ?

They just put it in the tank and do it ,,as easy as getting something dipped but with electric and acid involved

It's not like it needs loads of careful prepping , as needed to do the re-chrome

that's where the problems are and "getting the staff " $:-\$

wildon · « **Reply #15 on:** April 15, 2011, 12:00 AM »

Quote from: Hunterdubber on April 14, 2011, 11:55 PM

The de chroming process is easy ,,isn't it ?

They just put it in the tank and do it ,,as easy as getting something dipped but with electric and acid involved

It's not like it needs loads of careful prepping , as needed to do the re-chrome

that's where the problems are and "getting the staff " $:-\$

Think you're right .. not much can go wrong i don't think .. although .. i have 3 hutch's being dechromed right now so i'll let ya know next week

one of these is a pro racer too .. that'll be going for the candy blue touch

GTnumber1 · « **Reply #16 on:** April 15, 2011, 12:11 AM »

Quote from: wildon on April 15, 2011, 12:00 AM

Quote from: Hunterdubber on April 14, 2011, 11:55 PM

The de chroming process is easy ,,isn't it ?

They just put it in the tank and do it ,,as easy as getting something dipped but with electric and acid involved

It's not like it needs loads of careful prepping , as needed to do the re-chrome

that's where the problems are and "getting the staff " $:-\$

Think you're right .. not much can go wrong i don't think .. although .. i have 3 hutch's being dechromed right now so i'll let ya know next week

one of these is a pro racer too .. that'll be going for the candy blue touch

not much can go wrong

i had a DP freestyler that took to swivells chromer and when i got it back looked like a fookin pk ripper

the cnuts squared it off some how......... dont ask me how but they did

took me fookin hrs to get tubes rite.... nope need someone good its for my GT...RACE FRAME

i might have a chance on here with a single top tube

wildon · « **Reply #17 on:** April 15, 2011, 12:22 AM »

what, they fooked it up just stripping it?

you'll never win nothing costa .. give it up

GTnumber1 · « **Reply #18 on:** April 15, 2011, 12:25 AM »

Quote from: wildon on April 15, 2011, 12:22 AM

what, they fooked it up just stripping it?

you'll never win nothing costa .. give it up

yep tell me bout it even the chromer was FIXED!!!!!! fookin conspiracy against me so i dont stop building my sh1t twin top tubes

Pooch · « **Reply #19 on:** April 15, 2011, 07:02 AM »

Steve69 has got a sweeeet candy blue hutch. Looks nice mate.

stu70 · « **Reply #20 on:** April 15, 2011, 11:41 AM »

Had a JMC Shadow frame with a bad/peeling rechrome job on it, sent it off to SBD to be stripped and redone in candy red, top work

and looked stunning

Pooch · « **Reply #21 on:** April 15, 2011, 12:13 PM »

Quote from: stu70 on April 15, 2011, 11:41 AM

Had a JMC Shadow frame with a bad/peeling rechrome job on it, sent it off to SBD to be stripped and redone in candy red, top work and looked stunning

That is soooooooo nice mate and a great frame!!!!!

jT Racing · « **Reply #22 on:** April 19, 2011, 12:38 PM »

The frame is 8/10 but the forks are dire. No idea how that came to pass but I guess they were chromed at different chromers.
Had it the other way round on another hutch.

MartyC · « **Reply #23 on:** April 19, 2011, 12:53 PM »

Quote from: stevencosta on April 14, 2011, 11:50 PM

Quote from: Hunterdubber on April 14, 2011, 11:32 PM
Quote from: stevencosta on April 14, 2011, 11:28 PM
whos stripping the chrome mate?

Do you need to Costa ?

SBD will just silver powdercoat base straight on to the chrome ,, then use a translucent red powdercoat over the top ,,I reckon

got a frame that needs de chroming and not sure whos good out there to trust without fooking it up $:-\$

Talk to SBD, he has a local guy that can strip it back and he's not expensive

Twesnik · « **Reply #24 on:** May 22, 2011, 10:18 AM »

Quote from: Pooch on April 14, 2011, 10:07 PM

Will be stripped down to it's birthday suit and sent to Dan for a candy red!!! Nice

Looks stunning,new chrome!
Leave mine Hutch Pro Racer OG 2-Tone the way it is.......
Alu-base powdercoat........
Works fine on a ripper!