Author Topic: something new something s&M new (Read 5152 times)

motomagII · « **on:** February 07, 2011, 07:56 PM »

not quite finished as short of bits robbed some from other bikes to complete it though
can anyone tell me what seat post size is need seat clamp for it
also need :
top hat washer for cranks profile size axle 19.05mm to fit profile chainring the one in the background
set race tyres dth preferred
v brake noodle

feels good always wanted new school race bike had set my heart on a park bike but this came along and wow its nice

Dark Diggler · « **Reply #1 on:** February 07, 2011, 08:12 PM »

27.2 seapost on a steel frame is 30.0mm clamp greg

Nice frame dude.

motomagII · « **Reply #2 on:** February 07, 2011, 08:13 PM »

oh foprgot the seat post is about 26.5 mm

there web site says 30mm seat clamp i dont think thats right
weighs about 25lbs at moment but ive gotta change the wheels and tyres (tyres weigh ton at moment ),bars for set slams or fly mike day race bars
reckon gonna be 22/23 lbs when finished

Dark Diggler · « **Reply #3 on:** February 07, 2011, 08:18 PM »

Greg, its 27.2

Dark Diggler · « **Reply #4 on:** February 07, 2011, 08:23 PM »

Have another look, at the bottom it says what size seatpost it needs

http://www.sandmbikes.com/_product_63772/Frame_-_38_Special

motomagII · « **Reply #5 on:** February 07, 2011, 08:25 PM »

sorry simon just been and dfound me vernier calipers yep i need 30mm seat clamp anyone please

Betty · « **Reply #6 on:** February 07, 2011, 08:26 PM »

Nice Greg...

It'll be ok for park use n all....

Dingobmxer · « **Reply #7 on:** February 07, 2011, 09:08 PM »

nice that Greg

I had a white RV24 frame arrive today too

Dingo

motomagII · « **Reply #8 on:** February 07, 2011, 09:09 PM »

rioght found noodle and seat clamp just need top hat washer now anyone

James Nada · « **Reply #9 on:** February 07, 2011, 09:36 PM »

Tasty!

rooski · « **Reply #10 on:** February 07, 2011, 10:06 PM »

very nice Gregster

let me have a go on this next time yer out

Jon The Bassist · « **Reply #11 on:** February 07, 2011, 10:25 PM »

Greg, I've got a 19mm top hat spare from the generic 19mm BB kit I just got - you're welcome to try it

It would fit a chainwheel with about 24mm hole. LMK

motomagII · « **Reply #12 on:** February 07, 2011, 10:30 PM »

cheers john ill try it if i dont find one ive got about 10 in garage and not one seems to fit lol

Gish · « **Reply #13 on:** February 07, 2011, 10:41 PM »

they are about £5 deliverd direct from profile. i put a add up here afew weeks ago but no joy so bought one from profile only took a couple of days.
heres the link if ya need it

http://profileeurope.co.uk/wp/?page_id=194&category=7&product_id=29

HEYWOOD BMX · « **Reply #14 on:** February 07, 2011, 11:56 PM »

Very nice Greg.DMR do nice 30mm clamps for not a lot

Jon The Bassist · « **Reply #15 on:** February 08, 2011, 05:23 PM »

Quote from: motomagII on February 07, 2011, 10:30 PM

cheers john ill try it if i dont find one ive got about 10 in garage and not one seems to fit lol

Greg, I can pass it to you next Tuesday. If you want it urgently, PM me your address

motomagII · « **Reply #16 on:** February 10, 2011, 09:45 PM »

rode this for first time at bradford tonite man its quick.loved it even though i was very sketchy .think the different headangle caught me out bit need to move bars forward a tad maybe .loverly frame great geometry and with dth rear tyre moe joe front it runs super quick .wish it was old school for racing on for sure .