Author Topic: hutch western stem (Read 2232 times)

john4130 · « **on:** October 19, 2010, 10:16 PM »

i've never had one or seen one in the flesh for years but this doesn't look like anything like the ones i remember or like any on some builds i've seen.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=120635360042&ssPageName=STRK:MEWAX:IT

wildon · « **Reply #1 on:** October 19, 2010, 10:21 PM »

Thats cause it aint one

HUTCHMAN · « **Reply #2 on:** October 19, 2010, 10:23 PM »

that's like saying i've got a Cosworth for sale when in fact it's a MK1 fiesta

currio · « **Reply #3 on:** October 19, 2010, 10:25 PM »

SaMAlex · « **Reply #4 on:** October 19, 2010, 10:34 PM »

Thats a HOMELESS stem

(not really

)

brass monkey! · « **Reply #5 on:** October 19, 2010, 10:35 PM »

someone report it

it's a bit like Selling a Hutch PRO RAIDER, as a Hutch PRO STAR

surely no-one would be greedy or cnut-ish enough to do that.... would they

Bettyswallocks · « **Reply #6 on:** October 19, 2010, 10:53 PM »

Has Neil polished it?....

john4130 · « **Reply #7 on:** October 19, 2010, 10:55 PM »

Quote from: HUTCHMAN on October 19, 2010, 10:23 PM

that's like saying i've got a Cosworth for sale when in fact it's a MK1 fiesta

isn't this a mk1 fiesta cosworth

HUTCHMAN · « **Reply #8 on:** October 19, 2010, 10:58 PM »

stidds · « **Reply #9 on:** October 19, 2010, 11:44 PM »

That stem looks like a Diamond Back stem circa last couple of years, polished to fook and still sh*t.

QUADROPHENIA · « **Reply #10 on:** October 20, 2010, 08:03 AM »

and people are still bidding on it

Mattdub · « **Reply #11 on:** October 20, 2010, 08:42 AM »

pos

ozone · « **Reply #12 on:** October 20, 2010, 09:59 AM »

I thought I had seen it all...

p1nell · « **Reply #13 on:** October 20, 2010, 03:34 PM »

Hi too everyone.

First off i travelled to derby at the weekend to go and collect a fully built rebel/faze7 and the gentleman gave me lots of extras he did want anymore for free, one being the GT frame in my listings which no doubt you've all take a look at! I pride myself on my work and dont try and RIP people off unlike some others out there! (AS YOU CAN SEE IN MY FEEDBACK ON EBAY) i pride myself on being upfront and as honest as possible (treat people how i'd expect to be treated). I'm sorry if my mistake (fooled) has caused any harm or bother to people as it was never intended! I have since removed the listing as it wouldn't be fair to potential buyers. The stem was stamped with the H and underside of the top clamp say (hutch product) so i thought it was all above board!! I did a little research on the stems as hutch bikes aren't my forte! and did see most of the hutch stems have those other two holes for cables or something on the base, so it did raise suspiscion, but i just thought it could have been a different model! as i said i aint up to speed with the hutche's, i'm more a haro and rebel freestyler guy!

Sorry if i offended as i wasn't intended

And for all the haters i'm usually quite on the ball!!!!
My p1 definately is a 400bhp p1 though (thats for sure) Pics to follow, aswell of some of my ongoing builds at the mo.

I suppose now ni've offended people i wont get no help on here again for decals and stuff?

p1nell · « **Reply #14 on:** October 20, 2010, 03:38 PM »

The fiesta cosworth will definately show my motor up

hahahahaha

p1nell · « **Reply #15 on:** October 20, 2010, 04:16 PM »

Abit nicer than the fiesta mate (notice the AP 6pots to slow the 400 ponies down sharpish!

I'll keep that stem for my daughters scooter when she's abit older!

Atleast the mx seat clamp is dc stamped so I wasn't totally taken for a mug!

p1nell · « **Reply #16 on:** October 20, 2010, 04:47 PM »

it's got a panda engine under the bonnet!

I haven't blocked the plate because I don't mind who see's it!!!

MartyC · « **Reply #17 on:** October 20, 2010, 05:00 PM »

Quote from: p1nell on October 20, 2010, 03:34 PM

Hi too everyone.

First off i travelled to derby at the weekend to go and collect a fully built rebel/faze7 and the gentleman gave me lots of extras he did want anymore for free, one being the GT frame in my listings which no doubt you've all take a look at! I pride myself on my work and dont try and RIP people off unlike some others out there! (AS YOU CAN SEE IN MY FEEDBACK ON EBAY) i pride myself on being upfront and as honest as possible (treat people how i'd expect to be treated). I'm sorry if my mistake (fooled) has caused any harm or bother to people as it was never intended! I have since removed the listing as it wouldn't be fair to potential buyers. The stem was stamped with the H and underside of the top clamp say (hutch product) so i thought it was all above board!! I did a little research on the stems as hutch bikes aren't my forte! and did see most of the hutch stems have those other two holes for cables or something on the base, so it did raise suspiscion, but i just thought it could have been a different model! as i said i aint up to speed with the hutche's, i'm more a haro and rebel freestyler guy!

Sorry if i offended as i wasn't intended

And for all the haters i'm usually quite on the ball!!!!
My p1 definately is a 400bhp p1 though (thats for sure) Pics to follow, aswell of some of my ongoing builds at the mo.

I suppose now ni've offended people i wont get no help on here again for decals and stuff?

Good on you mate for doing the decent thing, everyone loves a trier

Welcome to the good ship Radbmx, we're a good bunch here and few people if any will hold this against you! This is a community and the community sticks together, hopefully you will hang around and become a part of that community; everyone helps everyone else out

.

Nice P1 by the way, my uncle has one similar

Mattdub · « **Reply #18 on:** October 20, 2010, 11:02 PM »

Quote from: p1nell on October 20, 2010, 03:34 PM

Hi too everyone.

First off i travelled to derby at the weekend to go and collect a fully built rebel/faze7 and the gentleman gave me lots of extras he did want anymore for free, one being the GT frame in my listings which no doubt you've all take a look at! I pride myself on my work and dont try and RIP people off unlike some others out there! (AS YOU CAN SEE IN MY FEEDBACK ON EBAY) i pride myself on being upfront and as honest as possible (treat people how i'd expect to be treated). I'm sorry if my mistake (fooled) has caused any harm or bother to people as it was never intended! I have since removed the listing as it wouldn't be fair to potential buyers. The stem was stamped with the H and underside of the top clamp say (hutch product) so i thought it was all above board!! I did a little research on the stems as hutch bikes aren't my forte! and did see most of the hutch stems have those other two holes for cables or something on the base, so it did raise suspiscion, but i just thought it could have been a different model! as i said i aint up to speed with the hutche's, i'm more a haro and rebel freestyler guy!

Sorry if i offended as i wasn't intended

And for all the haters i'm usually quite on the ball!!!!
My p1 definately is a 400bhp p1 though (thats for sure) Pics to follow, aswell of some of my ongoing builds at the mo.

I suppose now ni've offended people i wont get no help on here again for decals and stuff?

Welcome to RAD

, like Marty said ^^ cheers for putting things much straighter . Ask away ref any questions etc , I know fook all but some here know a bit

Nice scooby doo btw

p1nell · « **Reply #19 on:** October 21, 2010, 12:33 AM »

Cheers fella's it was a GENUINE HONEST MISTAKE! as I said I don't know much about the hutch bikes and bits, I did some homework and thought it was similar but minus the two holes on the hutch stems I googled, I just thought it might have been a slightly older or newer stem as it has hutch product etched underside of the top clamp!! As anyone can see from my other eBay listings and feedback I'm usually on the ball. Take a look at my mid school gt survivor listing, in the background you can see more stems to be listed and my torker 280air but stockades up as a 280x (which I'm soon changing if I can get the repo decals.

I'm glad I've had my say and I was gutted to see all the flack I was getting without being able to put my side across!
I ain't hard up or a delboy trying to rip folks off! funny how quick people judge though without knowing the details. Big thanks to the few who messaged me through the bay to let me know, most were nice and polite and one proper nob!

Atleast it's made a mad topic (I couldn't believe the fuss I'd caused!)

Again thanks. P.S I do polishing if any peeps need

p1nell · « **Reply #20 on:** October 21, 2010, 01:22 AM »

Marty I wished my uncle had a jap motor, quality mate. It's my second one, somehow got hooked on them when my real passion besides bikes is dubs, thinking of going for a mag feature with a mk1 caddy if I ever get the time and can twist my girls arm!

Thanks for the compliment Matt, I've popped one engine in her already! (didnt put me off though but hurt the wallet!) she's far from standard anymore (weekend toy)

I've got a few old school builds I'm starting very soon, I've just been collecting bits slowly, I was wondering if you know where I could get hold of any decals (obviously I'd pay) ??

Any help appreciated

cheers

Mattdub · « **Reply #21 on:** October 21, 2010, 08:46 AM »

Quote from: p1nell on October 21, 2010, 01:22 AM

Marty I wished my uncle had a jap motor, quality mate. It's my second one, somehow got hooked on them when my real passion besides bikes is dubs, thinking of going for a mag feature with a mk1 caddy if I ever get the time and can twist my girls arm!

Thanks for the compliment Matt, I've popped one engine in her already! (didnt put me off though but hurt the wallet!) she's far from standard anymore (weekend toy)

I've got a few old school builds I'm starting very soon, I've just been collecting bits slowly, I was wondering if you know where I could get hold of any decals (obviously I'd pay) ??

Any help appreciated cheers

If you pm Del on here , he's always excellent at helping with decals as is Firebird if Del can't help . I can see a nice Kwacka sat there too ! ....

There's a fair few on here also into dubs , check out a recent thread in the lounge

pickle · « **Reply #22 on:** October 21, 2010, 08:50 AM »

are they rebel/faze 7 freestylers there?

p1nell · « **Reply #23 on:** October 21, 2010, 11:09 AM »

big thanks Matt, will Del mind a random stranger asking for decals though? the kwaka is my baby, nearly finished building her (can't wait to rag it again as it's been a while since the Conrod came through cases!!!

They sure are pickle, I know a pickle on the p1woc site!

I'm going for one White and one chrome rebel, as I think that's all they did the revels in and I'll build one as a faze7

Nice because I live in Shropshire area and they were built not far from me bitd (a stones throw away) can you see my haro gen2 torker built survivor? I've got all the bits to make a start on it, she will be my baby.