Author Topic: CW Cali Boulevard Resto Pg 7 update 22/6/11 Pics Added (Read 24894 times)

MartyC · « **Reply #125 on:** February 10, 2011, 02:40 PM »

Quote from: ANIMAL on February 09, 2011, 07:07 PM

Why does it do that if I put the gay pensioner in ?

Apparently it's Glen's alter ego

Jamroll · « **Reply #126 on:** May 19, 2011, 08:15 PM »

OK,
So Frame Forks & Bars arrived with Dan safely and have been given the SBD treatment. Finish as always is just

Drive arm side of the frame look the absolute bollocks , and I'm well fookin chuffed with the colour

Now I've been chattin to Dan about this on and off for the last couple of days as the Non Drive Arm Side unfortunatley didn't come out as well, we dont know if the frame got damaged in transit form the chromers to Dan or wot has happened but the rear triange, Foot Plate and from the BB to the gusset is peppered with wot look like rub marks / scratches under the Candy

The Forks are stunning and the bars are remainin chrome but the frame is Boxed up ready to go back to Dan tomorrow to be stripped back to chrome so we can take a look at wot the Marks are, I'm kinda hgoping they are just a little bit of tape residue or some scratches that will polish, who knows. Appreciate Dan doing this for me as he has said once the frame is sorted he'll do again FOC.

Top Bloke is Dan, Thanks again Fella.

markyp · « **Reply #127 on:** May 19, 2011, 08:26 PM »

total sickener Al,especially after all the trouble youve had.having said that it looks the nuts.that candy over chrome must be awesome in the flesh especially if my ghp which is candy over silver looks amazing,bet it rocks

Robbo · « **Reply #128 on:** May 19, 2011, 08:29 PM »

Looking good so far Alec, hope it comes out ok when finished.

Jamroll · « **Reply #129 on:** May 19, 2011, 08:30 PM »

Quote from: markyp on May 19, 2011, 08:26 PM

total sickener Al,especially after all the trouble youve had.having said that it looks the nuts.that candy over chrome must be awesome in the flesh especially if my ghp which is candy over silver looks amazing,bet it rocks

Looks like Liquid Mark, Really need some good outside shots to do the colour justice bud...when it comes back

animal · « **Reply #130 on:** May 19, 2011, 09:33 PM »

That finish is so Sexy

Picklez · « **Reply #131 on:** May 19, 2011, 11:37 PM »

Absolutely stunning. Shame about the non-driveside, you've certainly been through the mill with this frame. Hang in there.

Cant wait to see this finished.

BENDYCAT ELEVENTEEN · « **Reply #132 on:** May 19, 2011, 11:46 PM »

I'm glad to see a roll of tissue next to the frame - i just hope it is super absorbent

gonna look a stunner mate

Mattdub · « **Reply #133 on:** May 20, 2011, 08:35 AM »

That's gonna look pretty mad once sorted & SBD is da man

Swivel · « **Reply #134 on:** May 20, 2011, 08:43 AM »

Al looks good mate, bloody shame about the non-drive side

hopefully once built it'll be fine, is this for rider or show?

Jamroll · « **Reply #135 on:** May 20, 2011, 08:57 AM »

Thanks for all then nice comments guys, have got a little disheartned with the build but your comments will certainley push me to get this finished

Quote from: Swivel on May 20, 2011, 08:43 AM

Al looks good mate, bloody shame about the non-drive side hopefully once built it'll be fine, is this for rider or show?

Matt, was going to be a show build, problem is I've spent so much on a paint job,haven't really got the money for some parts i wanted to put on it $:-\$ , so will probably use it for the summer if i have it finished in time

Even if i ride it though i want to get it as close to perfect as i can

MartyC · « **Reply #136 on:** May 20, 2011, 11:35 AM »

Looks great and Dan is a top bloke for the offer; I have found he that he is partial to a few cold tins

Jamroll · « **Reply #137 on:** May 20, 2011, 11:46 AM »

Quote from: MartyC on May 20, 2011, 11:35 AM

I have found he that he is partial to a few cold tins

Marty, thats a given Bud

Mamba · « **Reply #138 on:** May 21, 2011, 04:54 PM »

WOW!!

That finish is awesome, god that's going to look something extra special when done.
Shame about the set back, but that's all it is at the end of the day, she'll be worth it in the end . A moment of someone else's carelessness is all it takes to damage all the hard work and effort but, at least it can be srted. I dare say Dan weren't too happy either.

Rodgy1970 · « **Reply #139 on:** May 21, 2011, 10:50 PM »

looks absolutely stunning

total shame about the damage

are you going to get it chromed again $:-\$

Jamroll · « **Reply #140 on:** May 22, 2011, 12:43 PM »

Quote from: Mamba on May 21, 2011, 04:54 PM

WOW!!

That finish is awesome, god that's going to look something extra special when done.
Shame about the set back, but that's all it is at the end of the day, she'll be worth it in the end . A moment of someone else's carelessness is all it takes to damage all the hard work and effort but, at least it can be srted. I dare say Dan weren't too happy either.

Can I just make this perfectly clear....the damage on the frame was there PRIOR to it arriving with Dan, Dan didn't realise the frame had come directly from the chromers up in york and not via me, and thought i was ok with the marks on it.

Thanks

Quote from: rodgy on May 21, 2011, 10:50 PM

looks absolutely stunning

total shame about the damage

are you going to get it chromed again $:-\$

Rodgy, Am i fook I haven't got the funds to get chromed again for the 3rd time

Dans gonna send the frame back to me without the colour on it and I'll see if it will polish up $:-\$

Mamba · « **Reply #141 on:** May 22, 2011, 01:29 PM »

Quote from: jamroll on May 22, 2011, 12:43 PM

Quote from: Mamba on May 21, 2011, 04:54 PM
WOW!!

That finish is awesome, god that's going to look something extra special when done.
Shame about the set back, but that's all it is at the end of the day, she'll be worth it in the end . A moment of someone else's carelessness is all it takes to damage all the hard work and effort but, at least it can be srted. I dare say Dan weren't too happy either.

Can I just make this perfectly clear....the damage on the frame was there PRIOR to it arriving with Dan, Dan didn't realise the frame had come directly from the chromers up in york and not via me, and thought i was ok with the marks on it.

Thanks

Mate, I was referring to the damage at the chromers or when it was in transit. If the scratches can't be felt on your fingertips and is on the chrome layer itself it should polish out nicely. Bit of a PITA but not impossible. Fingers crossed it is and it's easily rectified.

ozone · « **Reply #142 on:** May 22, 2011, 05:43 PM »

Your patience astonishes me. I would have lost the plot ages ago and set about the thing with a Stihl saw.

Hope you can polish out the imperfections. (were they caused by the courier on the journey from the chromers to SBD's?)

superbikedan · « **Reply #143 on:** May 22, 2011, 08:31 PM »

Quote from: ozone on May 22, 2011, 05:43 PM

Your patience astonishes me. I would have lost the plot ages ago and set about the thing with a Stihl saw.

Hope you can polish out the imperfections. (were they caused by the courier on the journey from the chromers to SBD's?)

who knows it hard to tell, one thing i do regret is not calling Al on the day before i painted it, it just didnt seem

the quality show piece i was expecting and after reading all that Al has been through i really thought that he'd seen

it and was ok with the final chrome finish, we live and learn and i'm sure it will all be polished out, repainted and

Al gets his show piece

Jamroll · « **Reply #144 on:** June 02, 2011, 02:12 PM »

Got a question for you lot.

who knows of a good chromer

Need to get chromed again, Dave Allen Chrome have got a 16 week turnaround...too long.
Matt (Swivel) you know someone you trust dont ya mate, Sam (meticulous) Has Paul sent his frame to you??? Could i maybe do the same.
Cheers

Al

southern andy · « **Reply #145 on:** June 02, 2011, 02:38 PM »

Sawzall and i just had a load of stuff done at Hampshire Electro platers in Southampton. It took 5 weeks and to say we're both happy is an understatement.

http://www.cylex-uk.co.uk/company/hampshire-electroplating-14104670.html

We had our stuff back in 5 weeks aswell, just like they said.

Pictures to come in 5 mins.

Jamroll · « **Reply #146 on:** June 02, 2011, 02:56 PM »

Quote from: Southern Andy on June 02, 2011, 02:38 PM

Sawzall and i just had a load of stuff done at Hampshire Electro platers in Southampton. It took 5 weeks and to say we're both happy is an understatement.

http://www.cylex-uk.co.uk/company/hampshire-electroplating-14104670.html

We had our stuff back in 5 weeks.

Pictures to come in 5 mins.

Wot did they do for you bud???
I think i've got one more roll of the dice with this one...I need it as close to purfect as i can...
Southampton would be coold as I can drop that of myself...I'm only over in Petersfield.

southern andy · « **Reply #147 on:** June 02, 2011, 03:08 PM »

Uploading pictures now for you.

They did about 3 or 4 sets of bars, a few sets of cranks and a seat clamp i think, they also stripped a couple of frames aswell.

Sawzall has used them a few times.

They rechromed his Hurricane BMX last year. Check out his me and my bikes.

southern andy · « **Reply #148 on:** June 02, 2011, 03:12 PM »

Rickman Pro bars, MRD Expert bars and Terry cable cranks.

Jamroll · « **Reply #149 on:** June 02, 2011, 03:21 PM »

Lush

Are they expensive?

Author Topic: CW Cali Boulevard Resto *Pg 7 update 22/6/11 Pics Added * (Read 24894 times)

Mamba

Rodgy1970

Mamba

ozone

Author Topic: CW Cali Boulevard Resto Pg 7 update 22/6/11 Pics Added (Read 24894 times)