Author Topic: 84 Haro Sport build (stem and handle bar suggestions) (Read 7520 times)

pezza · « **on:** September 03, 2010, 02:49 PM »

Well build number two is coming along and nearly finished, just need to take some links out the kmc chain, swap the saddle over for the white dominator and sort a stem and handlebars out. I have some 85 haro master bars in red, that I was thinking of getting SBD to powder white to match the frame, and then keep it a black and white theme.

Stuck on stem at the moment, I have a forklifter in radberry, which again I could get powdered but it has the mods bolt in it, and I don't really want to drill out the NOS front MX1000 quick release.

No wise cracks about the brake lever, just got feed up with it dangling around!

What do people think, get the forklifter powdered black, and the bars white, or stick something else on?

Pezza

Swivel · « **Reply #1 on:** September 03, 2010, 03:11 PM »

Nice fella, just dropped you a PM about the stem

MartyC · « **Reply #2 on:** September 03, 2010, 03:16 PM »

White bars but maybe go for a different stem as the Radberry Forklifter might be sought after

ozone · « **Reply #3 on:** September 03, 2010, 07:30 PM »

Strip and polish the stem then add new decals. Will look great against white bars and a silver Forklifter (if done properly) would be worth more than a Radberry.

brettypeeps · « **Reply #4 on:** September 03, 2010, 08:50 PM »

I would be putting a silver or white forklifter on there myself. I don't think black would look right but there again who knows..

A forklifter yes yes yes with white bars

snav69 · « **Reply #5 on:** September 03, 2010, 08:52 PM »

Original Chrome Sport bars

Put them back on it

Swivel · « **Reply #6 on:** September 03, 2010, 09:29 PM »

Why not an anlun stem

, look at Arnauds (double chevron) in the museum part that'll give you an idea of how a sport factory spec will look

Swivel · « **Reply #7 on:** September 03, 2010, 09:36 PM »

Arnauds

I know yours is more freestyle aimed but an Anlun would work fine also, not just saying that as I have one

SteveD · « **Reply #8 on:** September 03, 2010, 09:44 PM »

Got a black n white theme one myself. http://www.radbmx.co.uk/forum/index.php'topic=89078.0

pezza · « **Reply #9 on:** September 03, 2010, 11:22 PM »

Thanks for the comments and suggestions. I'm liking the white master bars steveD, think I'll go that route. Still not sure re stem as if I use my forklifter I need to drill out the mx1000 to route the front cable. May do it as this is going to be my main rider, so nice to be able to spin the bars, the master can be kept in the office.

CD17 · « **Reply #10 on:** September 04, 2010, 06:56 AM »

You don't have to use the potts, so you could leave the front brake as it is or you can do it like this.........

This way you will only loose the adjuster, so you can put it back as it was if you want after, just get another adjuster

Bigplinky · « **Reply #11 on:** September 04, 2010, 07:33 AM »

Haro Vectors and then you canforget about the stem

animal · « **Reply #12 on:** September 04, 2010, 11:52 PM »

Vectors defo Yum Yum

pezza · « **Reply #13 on:** September 06, 2010, 10:59 PM »

I finally made a decision, as I picked up a yellow forklifter, so I guess it has already been painted as I don't think they shipped in yellow.
I'm going to strip it and see what the finish is like underneath, if it's good I'll polish it up, if poor then off to SBD with the bars.

Pezza

ozone · « **Reply #14 on:** September 06, 2010, 11:08 PM »

Quote from: pezza on September 06, 2010, 10:59 PM

I finally made a decision, as I picked up a yellow forklifter, so I guess it has already been painted as I don't think they shipped in yellow.
I'm going to strip it and see what the finish is like underneath, if it's good I'll polish it up, if poor then off to SBD with the bars.

Pezza

Should look cool when stripped and polished.

BTW Forklifters were available in yellow.

http://redlinebmx.files.wordpress.com/2007/12/85ad.jpg

pezza · « **Reply #15 on:** September 06, 2010, 11:12 PM »

This place is full of info, never knew they came in yellow.

Oh well, do you know if they were painted or annodised, nitromoors or oven pride is calling.

Pezza

glenboy · « **Reply #16 on:** September 06, 2010, 11:19 PM »

vector ultimate freestyle bars look the bomb on a haro i have tried these bars on all my bmx's and they always looked to big but as soon as i whacked them on my haro i

em and they are the right age 84-85, excuse the grips i was trial fitting one of the oakley 1's

ozone · « **Reply #17 on:** September 06, 2010, 11:21 PM »

Quote from: pezza on September 06, 2010, 11:12 PM

This place is full of info, never knew they came in yellow.

Oh well, do you know if they were painted or annodised, nitromoors or oven pride is calling.

Pezza

They were painted (or powdered) so Nitro-Mors it is.

sweetbeats · « **Reply #18 on:** September 06, 2010, 11:44 PM »

I would say Haro vectors Every time....had action zones on mine in white that just didn't do it for me....GT's Look Ok but Haro Vectors are my fave bars end of

Giving this a big Tweek as we Speak

New wheels,Brakes,Bars,Tyres,Pedals.
This is it before the makeover

sweetbeats · « **Reply #19 on:** September 06, 2010, 11:51 PM »

P.S Dig your build and good luck with it

MartyC · « **Reply #20 on:** September 07, 2010, 01:39 PM »

Quote from: glenboy on September 06, 2010, 11:19 PM

vector ultimate freestyle bars look the bomb on a haro i have tried these bars on all my bmx's and they always looked to big but as soon as i whacked them on my haro i em and they are the right age 84-85, excuse the grips i was trial fitting one of the oakley 1's

Nice coffee table

Author Topic: 84 Haro Sport build (stem and handle bar suggestions) (Read 7520 times)

pezza

ozone

snav69

SteveD

pezza

pezza

ozone

pezza

ozone

sweetbeats

sweetbeats