Author Topic: just fitted a euro bb into a usa bb using dmr adaptor on shimano dx cranks (Read 2875 times)

glenboy · « **on:** August 26, 2010, 12:47 AM »

right i have these dx cranks which were fitted to an expert size bike and as such had the euro bb all complete i was determined to use these cranks on my ripper but asked about for us bb for the dx cranks and was told no chance unless i spent 150 plus, the euro bb was in nice order and a decent one and steve off here put me on to a euro bb to american bb adapter and it was only 17 quid so i thought that'll do for me , got it installed , really nice cnc bit of kit ,installed easy and flush, but when installed , there was a bit of play in the spindle and the crank arms were very close to the frame on the chainstay area, so out it all came they are a weird spindle with sort of circlips so i moved it up one notch put it all back and this time there was no play , only think i had to do was get a couple of washers to go inside the crank arms just to give it that extra clearance and all was in and i'm well pleased and a fellow rad member steve saved me a long search and a lot of dosh with suggesting the adaptor , so thanks steve

, heres a few pics

heres the adaptor DMR wondercups 2

cranks and adaptor

fitted into bb

fitted with eurobb inside

on the bike YEAHHH

and another just for good measure

brettypeeps · « **Reply #1 on:** August 26, 2010, 01:06 AM »

Great bit of kit A job well done

glenboy · « **Reply #2 on:** August 26, 2010, 01:14 AM »

cheers mate , yes really easy to install just user error made it twice as hard

, nice quality bit of kit, there was no way i wasn't going to fit the dx cranks

brettypeeps · « **Reply #3 on:** August 26, 2010, 12:13 PM »

The Ripper is looking Spot on... I like the Skinny tyres. The bike looks fast standing still

markyp · « **Reply #4 on:** August 26, 2010, 02:44 PM »

i did exactly the same yeasterday with a set of suntour vx cranks,euro bb in to us adaptor,all suntour stamped,looks magic

glenboy · « **Reply #5 on:** August 27, 2010, 12:13 AM »

thanks bretty and marky its good when you get it all bolted together , i've had the cranks a few weeks just itching to get fitted

meticulous · « **Reply #6 on:** August 27, 2010, 08:59 AM »

chunky bike... chunky cranks... looks fast as fook

MSMXII · « **Reply #7 on:** March 23, 2011, 06:18 PM »

I'm still confused how this sealed euro BB is capable of working with the Shimano threaded spindle? You had mentioned that is was a sealed bearing Kajita, correct? Where do the bearings ride, in the center portion of the spindle where there is no threads? I'm wanting to do this conversion as well if it uses sealed, replaceable cartridge bearings. I found the same BB, just need the details