had the hubs and red nipples in some skinnies
had the spokes already 188mm's
bought another pair of nos ukai 1.5's off jt £45
alans had the nos 1.5 knarler knobby's, got some more -ebay
wanted some 20 by 1.5 rims, but drilled 28 holes - like a turbolites rims, for ages
these alesi rims, look similar to a 7xn 1.5, and the bonus is they are four, yes four quid each - ebay.
anyways i had the 28 hole bullseyes so i done fixed them up
i thought i had a 36 hole spoke set, in raw alloy spokes - i knew i had enough new little nipples as i used the red ones in the small flange suzue
typically who ever built the wheels I nicked the spokes from, used 2 different lengths of spokes, I had to paint strip some over spray off them
-then clean them, then sand them, then polish them, - so they all got jumbles up
-typically took ages to find the error as i was lacing them with odd spoke lengths -grrrrrrr!!!! -only 3mm in it but it was a right arse ache
anyways end result is good, had to 1 cross the front wheel as the spokes were too short
i've never seen 28 hole bullseye hubs THATS BECAUSE THEY ARE NOT BULLSEYES, BUT 1983 'DK' HUBS OR JAX HUBS
