Shine Side Rims.

[Macmania]

What is the best method for removing the anno from a wheel rim to create a shine side without making a balls up of the anno on the inside of the rim ? Thanks 

[Weeksy]

I would say start  with 800 quid wet and dry on a rubbing block, to minimise the risk of going over the 'corners', then go up to 1000 grit, 1200, then 1500

Cheers

Weeksy

[MartyC]

Flap wheel sander or a flat sander  

[trasher]

put them on your bike , and ride it with your brakes on ,,,should give you a good start 

[sid1972]

put them on your bike , and ride it with your brakes on ,,,should give you a good start 

    that would work.. 

as other have said mate, tape the inner edge off and flat.. 

[trasher]

id say go with something more corse than 800 or you will go through boxes of it and get no were, start with 240,320,400.500,600,800,1000,1200,1500,2000 and finish off with a 3000 avlon pad then loads of autol sol and wiz a buffing macining round it, 



  chinwheel used same principle 

fook off costa ,,,that chainrings made out of clear perspex 

[daz bmx it!]

costa that chainring is seriously off the hook mate

[double chevron]

Obviously made with an old CD, not metal 

[markyp]

its quite clearly computer generated

[NORTY40]

fook off costa ,,,that chainrings made out of clear perspex 

That explains why I got no response to my wanted thread ... ''Block paved chainring 44T wanted''  


Them rims and chainwheel are untrue mate





Nath , Mr costa is right imo , you want to start with something a bit coarser than 800's , use a sanding block like weeksy said too to keep it flat    I can see a resto thread ' before and after' here Nath  

[QUADROPHENIA]

nath you need a sawzall

[bobafett]

 I can see a resto thread ' before and after' here Nath  

I reckon more like a PM coming your way Joff asking you to do it for him 

[NORTY40]

 I can see a resto thread ' before and after' here Nath  

I reckon more like a PM coming your way Joff asking you to do it for him 

 

Very busy with goose bits at the mo John    

[bobafett]

Very busy with goose bits at the mo John    

Well if you are they're not mine 

You gave me most of my stuff last week 

[NORTY40]

Very busy with goose bits at the mo John    

Well if you are they're not mine 

You gave me most of my stuff last week 

   The best is yet to come  

[Macmania]

Had no internet for the past 24 hours 

Anyway...........thanks for the replies guys, i'll give it a go 



Joff...........got a job for you