These r 4 my next project that I'm on with another MRD Pro
got these forks on a purchse a while back and used them on my rider till this project came up . When I got them some Knob Jockey had drilled an extra hole in them 2 take an MX1000 brake
They only just take an MX900 on these an 890 is better.
So what I did first was get the chrome stripped . Then I Tig welded up the holes with Phosphur Bronge rods , so the weld would take on the braizing .
Then I refinished them using a dremel and ikle stone wheels etc .
Then my favourite bit I engraved the weld lines back onto the braize
