Author Topic: BOTM May 2010 - Vote results (Read 27344 times)

pickle · « **on:** May 08, 2010, 12:34 PM »

usual rules guys, 4 piccies and parts run down

Kaner · « **Reply #1 on:** May 08, 2010, 12:56 PM »

Haro Freestyler 1984

My 1st go at bike of the month

Parts:

1984 Haro Freestyler (Gen 3) fresh paint (N2 CUS) with Del'c decals
Haro Bars
Redline Forklifter Stem
Tioga Beartrap 2 Headset NOS
Blue AME grips NOS
Jumbo Meteor-Lite dunuts
Sugino 901 's NOS
Tech 4's NOS
ACS Plus brake pads NOS
White lever covers
Tagaki single peice crank and BB
Sharpe Blue BB Boot NOS
Shimano SX Pedals (1/2 inch) NOS
44T Sugino Chainring NOS
Tioga Spider NOS
Izumi Chain NOS and Chain Tensioners
ACS Z-Rims on LF ACS Hubs (Asahi spokes and Nipples) all NOS Components
Tioga Comp 3 Yellow Lable 1.75 (Repro) NOS
Elina Flight tech seat NOS
Oddssey Layback Seat Post NOS (Temp measure)
Tuff Neck Seat Clamp

Hope you like

HARORIDER · « **Reply #2 on:** May 08, 2010, 01:48 PM »

1985 HARO MASTER
SHOT GUN 3 SADDLE
CW FREESTYLE BARS
DC HINGED SEAT CLAMP
DC 880 BRAKE SET WITH ACS Z PADS
HARO FLUTED POST
HARO TYRES
ODI MUSHROOM GRIPS
TUF NECK POWER DISC AND CHAIN RING
SHIMANO DX PEDALS
SHARP BOTTOM BRACKET BOOT
REDLINE TWIN PINCH
CUSTOM DECALS ALL ROUND INCLUDING BARS

moanjam · « **Reply #3 on:** May 08, 2010, 02:09 PM »

1981 mongoose, frame colour matched by c4labs
skyway tuff II matching pair alloy front metal rear
kashi mx
tioga comp 3 fat/thin
tourney brake set
mks bm-7
goose crankset
goose b/b
goose seat clamp
goose gold stem
goose steel bars
goose pads
goose grips

markyp · « **Reply #4 on:** May 08, 2010, 02:47 PM »

1984 skyway t.a

rechromed 84 t.a frame and forks
rechromed first gen hutch pro bars
polished tuf neck stem
polished tufneck seat clamp
polished bullseye hubs laced to polished araya 7x
polished single pinch full wrap flights with bubble script chainwheel
early santa ana stamped gt layback seatpost
nos dc mx1000 with nos tech 3 lever and nos dc cable
nos tange 125 headset
nos polished skyway tuff pedals
nos oakley bib's
nos rainbow label comp 111's 1.75
repro padset and decals
nos izumi chain
dyed elina lightning bolt seat
BLINGTASTIC!!!!!

Sparky24 · « **Reply #5 on:** May 09, 2010, 01:57 PM »

might aswell add a nice red aero pro

this is me red raleigh aero pro , hope you like . parts list:
tange frame / forks
acs z rims on suzue hubs. nos
grippa tyres. nos
hatta headset , nos
pro neck stem , black. nos
GT pro bars. nos
dia compe mx 900/ tec 3 lever. silver . dc black cable dated 1983.
AME titron grips. blk/red combo
haro colour panel number plate. nos
Hadley bb
Redline 401,s 180mm
Redline 46th chain wheel
izumi chain. nos
kashimax mx seat.nos
shimano dx seatpost. nos
dia compe twin bolt seatpost clamp.
skyway pedals.
shimano dx 17th free wheel. nos
dia compe cable clips. nos

Macmania · « **Reply #6 on:** May 10, 2010, 10:10 AM »

1983 GT Pro

Parts List
1983 GT Pro Frame and Forks (undrilled)
GT Pro Bars XL
GT Seat Post
Beartrap II Headset
Tuf Neck Stem
Oakley B1-B Grips with Crud Plugs
Dia Compe MX900 Brake with Tech III Lever
MKS Footjaw Pedals
Restored Kashimax MX Seat
Dia Compe MX Seat Clamp
Izumi Chain
Sugino Chainwheel
Profile Box Cranks
Araya 7X Wheels
Tioga Comp III's
Haro Tech Plate
Repro Pad Set

beard1973 · « **Reply #7 on:** May 10, 2010, 10:31 AM »

** CRAIG SCHOFIELD - 1985 World Championship Winning RALEIGH TEAM AERO PRO **

This is actual bike that Craig won the World Championships on in 1985 (Whistler, Canada).
Some of the parts have had to be replaced but she is 99% correct to the spec that Craig rode in the biggest day of his BMX career.

Raleigh Team Aero Pro Frame & Forks
GT Pro Bars
ESP - Flying W Stem
Redline Flights
Redline Chainring 44T
Hutch Beartraps
Izumi Chain
GT Seatpost
Kashimax Aero
Suntour Seatclamp
Dia Compe MX1000's & Tech 4 Levers
Dia Comple Cables
A'me Unitrons
Szue Sealed Beaaring Hubs
Araya 7X Chrome
Original COMP II tyres
MRD Race Plate

No just a great bike... but a piece of BMX HISTORY

lloydi · « **Reply #8 on:** May 11, 2010, 12:38 AM »

Well, not a frequent poster (or visitor) here. I was just scouting around for some info about where there might be old school BMX events taking place and stumbled on this.

I thought I'd share my bike which has had the tiniest of tiny make-overs. And by that I mean, it got a bit of a clean and polish!

It's an '83 Torker-made Haro Freestyler, almost all original. In fact, it's so long ago that I bought anything for it that I can barely remember the makes/types of the parts. Instead of me doing a parts list, it's probably better for you folk to fill in the gaps, ha ha!

What I do know is this:

- 83 Haro Freestyler Frame/forks, all original, no rechroming or stickering
- Skyway Tuff IIs
- Suntour stem
- Suntour seat clamp
- Tuff neck chainwheel

- Cannot remember brand of seat, seatpost, handlebars, crank
- Tyres obviously new
- Brake levers and pedals are new and shitty (well, by new I mean 10 years old!).
- Gyro obviously not from '83 (not sure what year I put that on!)
But still, this is *not a rebuild*, it's a survivor that's had a little bit of TLC, and nothing more. Is that still valid? Whatever, enjoy (I hope!)

Anyway, back to my original point for being here ...are there any old school BMX events that happen in the UK?

Dark Diggler · « **Reply #9 on:** May 11, 2010, 04:06 PM »

All other entries go home.

Beware, this bike knows where you sleep

rollin72 · « **Reply #10 on:** May 13, 2010, 01:17 PM »

TORKER FREESTYLIST..TORKER FREESTYLIST..TORKER FREESTYLISTtorker freestylist frame, mrd forks
acs z-rims on suzue sealed hubs
odyssey barefeet tyres
skyway ez bars
sharp grips
dk stem with potts mod
dc mx 900 brakes and cables, dc tech 5 levers
acs seat clamp, fluted seatpost, unnamed suede seat
mks mp202 pedals
unnamed 3 piece cranks, power disk and chainwheel
kmc chain

NICE1 GAZ

bobafett · « **Reply #11 on:** May 16, 2010, 10:54 PM »

1981 minigoose (replica of my original minigoose BITD)

Full parts spec :

1981 nickel minigoose frame & forks wearing original finish and decals.
Mint original chrome femco rims
Shimano coaster rear hub
mongoose stamped front hub

union snakebellies
original mongoose stamped kashimax MX with original "gold" kashi guts
mongoose stamped seat clamp
mongoose stamped reflector
unstamped mongoose/sugino crank
mongoose stamped sugino snowflake chainwheel
mongoose stamped union rat-traps
mongoose stamped BB
mongoose stamped headset
ashtabula stem
mongoose steel bars
mongoose team grips (original)
NOS DC1020 caliper
NOS DC pre-bent lever
NOS DC cable and blocks
original mongoose pad-set

cuckoo · « **Reply #12 on:** May 17, 2010, 04:11 PM »

1979 Redline MX-II

1979 redline mxII og finish frame with powdered forks
tange grips
redline hotdog stamped v bars
redline brute stem
tange mx2 headset
dc 2 pcs clamp
shimano seatpost
kashimax seat
redline 400 cranks
sugino chainring
esh chain
suntour xc2 pedals
acs 28h hubs laced to france made chrome 28h rims
irc bmx racer 80x tires
dc tech 3 lever mx1000 calipers
repro redline pads

Glynnyboy · « **Reply #13 on:** May 19, 2010, 07:21 PM »

eamonn · « **Reply #14 on:** May 19, 2010, 08:48 PM »

REDLINE 102b survivor build

102b frame & forks
ACS Zds and hubs
Win v bars
Dia Compe mx1000 tech 3 lever
suntour arrow clamp
suntour stem
SR custom m pedals
GT layback
shotgun 2 seat

martylaa · « **Reply #15 on:** May 20, 2010, 04:47 PM »

1983 Hutch Pro Star ( Original Pro Star )

1983 Hutch Pro Star Frame and Forks ( stamped Pro underneath BB )
Hutch Deep H Stem ( Rechromed )
Hutch Pro Bars
Hutch Black Grips
Hutch Headlock
Hutch Aerospeed Cranks and Aerospeed Disc ( Crank Arms and Disc Rechromed ) with Original Hardware
Hutch Beartrap Pedals
Hutch Straight Seatpost ( NOS )
Hutch Seatclamp
Hutch Chrome Zapp Pads
Hutch Black Rad Kaps
Hutch Tyres ( I believe they are called Mudpluggers? )
Kashimax Aero Black
Tange Pro Star Headset ( Came with bike )
Dia Compe 1983 MX1000 Rear Caliper with Tech 3 Lever.
Black and Silver Izumi Chain
Arara 7X Chrome Rims ( NOS )
Shimano MX30 Freewheel

pickle · « **Reply #16 on:** May 27, 2010, 03:02 PM »

My MK10 Pit bike racer.......move over all you HUTCH, TA's and whatever.....it's Team Shyte!!

gary4130 · « **Reply #17 on:** May 29, 2010, 09:09 PM »

my black/white 'beat

started out as a green 'beat,finish came out pretty good for a rattle can job
specs: '85 beat/ta forks
wheels:tuffs/gt tyres or oddy barerfeat
drivechain:oddy crankk ,tioga cd,custom splatter job chainring,sr pedals
sterring:ez bars,gt stem, a'me unitrons or duals
braking:acs tangent levers,dia compe 1000 calipers
seating:dominater seat,oddy layback,dia compe seatclamp
extras:gt pegs rear,haro front,spinmaster 1 ,mean +moody cat called boba

brettypeeps · « **Reply #18 on:** May 31, 2010, 10:58 PM »

Haroriders master for me this month

sweetbeats · « **Reply #19 on:** May 31, 2010, 11:04 PM »

All Amazing

oldtired · « **Reply #20 on:** June 01, 2010, 02:34 AM »

+1 all superb, jmc?

pickle · « **Reply #21 on:** June 01, 2010, 07:24 AM »

have to say i voted for Beards TAP......Proper job on that

HARORIDER · « **Reply #22 on:** June 02, 2010, 07:50 PM »

cheers mate

pickle · « **Reply #23 on:** June 03, 2010, 07:20 AM »

neck and neck at the moment guys! get your votes in and make sure your fave wins it!

beard1973 · « **Reply #24 on:** June 03, 2010, 11:14 AM »

Cheers Pickle..

This is not just any old Raleigh... its a piece of BMX History... the actual bike that crossed the finishing line first in Canada 1985 and made Craig Schofield WORLD CHAMPION.

Author Topic: BOTM May 2010 - Vote results (Read 27344 times)

moanjam

Sparky24

lloydi

cuckoo

eamonn

martylaa

sweetbeats