Author Topic: Caustic Fun (Read 2409 times)

ORB · « **on:** March 04, 2006, 08:08 PM »

Well, I had this:

but red is poo, and it is a tad scratched, so into a vat of soda, here is 10 seconds into it:

20 Seconds:

Fish it out and have a looksie:

Couple more seconds for luck:

Rinsed under boiling water and a swift wipe with a Brillo Pad:

Will polish out the scratches and make it bling tomorrow

Oh, for all you caustic virgins, here is what i did:

-Jam jar, 2 table spoons of crystals, add cold water 3/4 to the top and mix it up with a fork.
-Get a baking tray that needs a clean and put the chain ring on in, and tip the caustic soda mix on.
-Cough like fook as you are in the kitchen.
-Tip the whole lot into the sink and tip a boiling kettle over it and then run the taps for a min or 2.
-Done.

theRuler · « **Reply #1 on:** March 04, 2006, 09:23 PM »

ORB · « **Reply #2 on:** March 04, 2006, 09:24 PM »

** Not to self **

Indoor caustic fun is not good

cant feckin breathe now

dordymush · « **Reply #3 on:** March 04, 2006, 09:53 PM »

lol mr health and safety.

harris · « **Reply #4 on:** March 05, 2006, 09:40 AM »

will this work on painted or powder coated items as ive got a few power discs that have poo paint on them

missfitsat101 · « **Reply #5 on:** March 05, 2006, 09:59 AM »

bet that smells paint made of poo

harris · « **Reply #6 on:** March 05, 2006, 10:06 AM »

ORB · « **Reply #7 on:** March 05, 2006, 11:50 AM »

Caustic will strip paint, but it has to be made VERY strong and it takes forever.

Nitromors is the nuts for paint

Nana · « **Reply #8 on:** March 05, 2006, 11:55 AM »

nitromours is pants for powder coating as i have tried for the 5th time to get my gt frame back to bare $:-\$

Wonder if a good old heat gun will do it

ORB · « **Reply #9 on:** March 05, 2006, 11:58 AM »

yeah, heat is good for Powder Nana.

Glass paper works too, but it is a pain in the arse mate, i hate to say it but with powder, take it to get blasted.

Nana · « **Reply #10 on:** March 05, 2006, 12:01 PM »

no chance im a skint flint sweaty sock im not getting anything blasted

i will do it myself as usuall

What you want a gt chainring for anyways

is it for that dp of yours with the block stem?

?

ORB · « **Reply #11 on:** March 05, 2006, 12:12 PM »

because it was cheap

jT Racing · « **Reply #12 on:** March 05, 2006, 01:34 PM »

want to sell it orb? got a nice powerdisc to match that and a gt pro to put it on.

oberonspacefruit · « **Reply #13 on:** March 24, 2006, 11:35 AM »

orb, tricky, we need a caustic thread in the how to section

motomagII · « **Reply #14 on:** March 24, 2006, 11:46 AM »

orb with the caustic and the tabs youll be coughing like 90 year old in no time mate lol

spinmaster · « **Reply #15 on:** April 03, 2006, 08:53 PM »

do you think this would work on some tech 77 levers or will it melt any bits on them?

sawzall · « **Reply #16 on:** April 03, 2006, 08:58 PM »

i have done dia compe tech 3s and 45 degree levers and have had no probs

spinmaster · « **Reply #17 on:** April 03, 2006, 09:12 PM »

cool, how long did you leave them in for or do you just keep an eye on them and take them out often to check if its doing the job.

QUADROPHENIA · « **Reply #18 on:** April 03, 2006, 09:17 PM »

jimbo i need them tech 77's mate for a rider

spinmaster · « **Reply #19 on:** April 03, 2006, 09:21 PM »

who said i had any, i was just enquiring for a friend of mine

sawzall · « **Reply #20 on:** April 03, 2006, 09:24 PM »

just keep checking should only take a minute or so dont leave them for to long or you will kill them

spinmaster · « **Reply #21 on:** April 03, 2006, 09:27 PM »

ok nice one, shall have a go at it.

QUADROPHENIA · « **Reply #22 on:** April 03, 2006, 09:27 PM »

Quote from: quimrider on April 03, 2006, 09:21 PM

who said i had any, i was just enquiring for a friend of mine

i know your lying jim you got no mates

spinmaster · « **Reply #23 on:** April 03, 2006, 10:07 PM »

i've been rumbled.

Author Topic: Caustic Fun (Read 2409 times)

theRuler

missfitsat101

Nana

Nana

motomagII

spinmaster

spinmaster

spinmaster

spinmaster

spinmaster