0 Members and 3 Guests are viewing this topic.
helicoil them
Quote from: harris on March 02, 2010, 08:19 PMhelicoil themDont think you would get away with it. Unless you wanted to use 1/2 pedals. When I've used helicoils in the past you have to make the hole bigger to accept the coil. So you would probably have to drill out the original thread to re-cut a new thread for the coil.I would try running a tap down the thread. Although a left handed tap might be difficult to track down.
Didn't some 3 piece cranks have 1/2" threads i know they weren't that common but do remember them Have you tried an 1/2" pedal in them
9/16" pedal taps are all the same thread 20tpi. I have a set of pedal taps if you want to borrow them the gay pensioner.
Quote from: Stidds on March 02, 2010, 09:44 PM9/16" pedal taps are all the same thread 20tpi. I have a set of pedal taps if you want to borrow them the gay pensioner.now thats the answer i needed ,,cheers sean ,,,,mate ill see what i can sort locally ,,if no joy ,ill give you a shout
Quote from: the gay pensioner on March 02, 2010, 09:49 PMQuote from: Stidds on March 02, 2010, 09:44 PM9/16" pedal taps are all the same thread 20tpi. I have a set of pedal taps if you want to borrow them the gay pensioner.now thats the answer i needed ,,cheers sean ,,,,mate ill see what i can sort locally ,,if no joy ,ill give you a shout No worries mate, pm me if you want them and I will post them up to you.