What replica parts have you had made/fabricated

[firebird4130]

Anyone had no option but to have a BMX part made from scratch. I'd be interested to see any such items ,Also where you had it done and the cost involved
Cheers 

[Del]

I've made one or two replica stickers, does that count?

[Biggeorge]

I made a brake mount back in the late 90's, twin cables worked a lot better than the crappy gyro cables and this was a great little device based on a sun ringle thing that you couldnt get over here. It was made out of a tnt seat clamp and a couple of adjusters.

[firebird4130]

  Was thinking more bike parts, but yeah decals are definately worthy  
That brakemount is cool too

[ozone]

Send Vert-Ego a PM.

[SaMAlex]

I made a 4 'spoke' grind disk out of a chopping board cos I wanted to use a flight ring as they were the one of the only 19mm chainrings

I made some brake cable outers out of ally tube so there was zero compresion. It didnt work cos I crashed and bent them so bad that the brakes didnt pull

I made some Hubs. (I designed them and got them made by someone else).

I made some Pegs. (I designed them and got them made by someone else).

Ive made  a few chain tensioners

[SaMAlex]

And invented left hand drive!

I was breaking a  chain every run (back when we all used a 44t charinring). I had to do something!

[firebird4130]

  just found one of my old gt disks all hammer marks from being straightened back after bending! !

[Gary72]

I've always wanted to know if you could get a replica skyway tuff made out of billet ally. Like how they make wheels in American Chopper.

[Dark Diggler]

If only someone had done some JMC seatposts..

[HUTCHMAN]

don't know why,but i thought there were some copy JMC seatposts a few years ago?

[retrochrome]

I wanted to make some new tuffs look like old style ones so I had these made by an engineer friend, similar to rad kaps.

http://www.burnerworldforum.co.uk/viewtopic.php't=20515

Made some for the BW boys too - John

[GTnumber1]

I wanted to make some new tuffs look like old style ones so I had these made by an engineer friend, similar to rad kaps.

http://www.burnerworldforum.co.uk/viewtopic.php't=20515

Made some for the BW boys too - John

those hubs are spot fookin on 

[jT Racing]

i once made some jmc andy patterson forks.

[Moose]

don't know why,but i thought there were some copy JMC seatposts a few years ago?

I might be wrong, but I think Sander made them (or there were questions raised about the authenticity of some JMC posts he was selling)? 

[neiljonarcus]

I wanted to make some new tuffs look like old style ones so I had these made by an engineer friend, similar to rad kaps.

http://www.burnerworldforum.co.uk/viewtopic.php't=20515

Made some for the BW boys too - John

hey there is a lad on hear selling these i think my mate moanjam just bought some  £20 

[oldtired]

made with big hammers, adjustable spanners and a vice about 83 84 ish , made about ten sets for my mates    ,this is the prototype although the finnished ones were just as bad,  ,  one of the lads ended up with two left ones cos i fooked up making em, lost count     ,funny as fook he had monk on for a week 

[Wayne Ryder]

don't know why,but i thought there were some copy JMC seatposts a few years ago?

I might be wrong, but I think Sander made them (or there were questions raised about the authenticity of some JMC posts he was selling)? 

Was that the time there was a few 'frank exchanges of opinions' over repro and genuine parts over on the Vintage BMX website? I seem to remember that, it was pretty worrying. I never knew a metal tube with a bend in it could raise so many hackles.

[HUTCHMAN]

don't think i got the idea in my head from there.think is was uk based.

[monkian]

I wanted to make some new tuffs look like old style ones so I had these made by an engineer friend, similar to rad kaps.

http://www.burnerworldforum.co.uk/viewtopic.php't=20515

Made some for the BW boys too - John

Can someone put a pic up of these for us non BW members please

[The Styler]

Due to Popular demand, I have had another batch of these brushed alloy skyway centre caps made.

Make your new skyways look like the 80's alloy hubbed versions with these laser cut discs !




Available exclusively on Burnerworld !

Simply fits over the hubs and stick on with a little silicon or no nails (like the rad kaps for graphites)

[firebird4130]

wow those look pretty damn convincing to me 

[(((sonic)))]

Had a set of repro JMC DY bars made as i could not find a set, then i found three sets..lol...always the case!!

[ED209]

Anyone who wants to make me a repro set of DP Ladder Bars please let me know