Author Topic: HELP (Read 733 times)

Batcycle · « **on:** February 05, 2010, 07:46 PM »

can you please identify which type of spindle is shown in this picture.

http://media.raleigh.co.uk/panda/large/DBX139.jpg

I own this three piece crank and need to replace my front sprocket/chainwheel. I do not know what to look for as i dont know what will fit

thanks

HEYWOOD BMX · « **Reply #1 on:** February 05, 2010, 08:31 PM »

Have you measured the end of the spindle where the chainwheel sits or the hole in your existing chainwheel? Most modern sprockets are made to fit either 19mm or 22mm spindles but there is a good chance that spindle is around 23.8mm... If in doubt,take it to a bike shop (NOT Halfrauds...)

Dark Diggler · « **Reply #2 on:** February 05, 2010, 08:34 PM »

Colourful 1st post.

Vernier calipers

Bigfrawg · « **Reply #3 on:** February 05, 2010, 08:37 PM »

i say 23.8

Batcycle · « **Reply #4 on:** February 06, 2010, 07:29 PM »

$:-\$ thanks guys, local bike shop says 24 mil

i doubt he is a tart but i cant find a sprocket of this spec online! has he made a mistake or am i

thanks again

Bigfrawg · « **Reply #5 on:** February 06, 2010, 07:31 PM »

what size are you after ? ( tooth wise )

Batcycle · « **Reply #6 on:** February 06, 2010, 07:32 PM »

more specifically a 44t sprocket of this spec

HEYWOOD BMX · « **Reply #7 on:** February 06, 2010, 07:51 PM »

If your bikeshop guy says 24,then it`ll no doubt be 23.8mm.This is an old school size,try the for sale section on here,you`ll need a one piece sprocket or one with a spider and bolts..

Batcycle · « **Reply #8 on:** February 06, 2010, 10:14 PM »

thanks m8 have sorted myself out wiv a nice profile racing 44t sprocket that will fit my axle! wudda gon mad wivout ya! safe

Author Topic: HELP (Read 733 times)

Batcycle

HELP

HEYWOOD BMX

Re: HELP

Dark Diggler

Re: HELP

Bigfrawg

Re: HELP

Batcycle

Re: HELP

Bigfrawg

Re: HELP

Batcycle

Re: HELP

HEYWOOD BMX

Re: HELP

Batcycle

whey!