Author Topic: BOTM FEB 2010 - Vote results (Read 20359 times)

Gashead · « **on:** February 03, 2010, 07:11 PM »

Get your votes in

AtariAger · « **Reply #1 on:** February 03, 2010, 08:00 PM »

A new year of building...here we go.

1985 Hutch "The Judge Series"

Survivor Blue F/F

Part list :

- Hutch Judge F/F
- Hutch Pro Racer Bars (all original)
- Hutch 2-n-1 head lock
- Hutch Deep H stem (polished)
- Hutch Aluminum hub set
- Hutch bear traps 1/2" (repop black cages)
- Hutch seat clamp
- Hutch seat post
- Hutch pad set Black (original)
- Hutch grips Black w/end plugs
- Pro Class crank set 2nd generation complete w/polished power plate and chain ring
- Ambrosio Hard Anodized Durex (NOS) w/Asahi stainless/brass nipples
- Dia-Compe 900 brake set
- Viscount Aero Black (ran out of Kashimax seats)
- Cheng Shin (fat/skinny)
- Tange 320 head set

xGoose · « **Reply #2 on:** February 04, 2010, 05:07 AM »

1983 Mongoose Cali Eric Rupe Tribute - Funky 2010 remix!

F+F - 1983 Mongoose Cali restored in Rupe colors (standing ovation to N2CUS for this part of the build!

)
Stem - Tuf Neck ProModel
Bars - NOS Skyway EZ-II
Grips - NOS AMI Tri's
Chainring - NOS Tuf Neck
Cranks - NOS Sugino CT-175
Spider - NOS Sugino A5
Chain - NOS Izumi
Pedals - New Crupi Pro Rounds
Wheels - New Skyway Tuff II whites
Tyres - Repro white Comp IIIs
Brake set - Dia-Compe MX1000 / 900 + Tech III + NOS Skyway Tuf pads
Seat Clamp - NOS Dia-Compe
Seat Post - Elina layback
Seat - NOS Viscount Aero
Padset - OG Mongoose

- Twas a blindin' Christmas!

Del · « **Reply #3 on:** February 04, 2010, 06:45 AM »

MRD Expert

MRD Expert F&F
GT Expert Bars
Tuff Neck Ace Stem
Tange MX3 Headset
Haro 1" Flex Fighter
Suntour Seatclamp
GT Seatpost
Jaguar Aero Seat
SM Mushroom Grips
DC MX1000 rear brake caliper
DC Tech 4 lever
DC Brake cable
Araya 7X rims with Suzue sm flange hubs
Shimano 16T Freewheel
Tioga Comp III re-issue Tyres
Redline 401 full wrap Crank
Tuff Neck Power Disk
PPP 43T Chainring
Shimano SX pedals
MRD Stadium Plate
Repro MRD Padset

Full Build thread here http://www.radbmx.co.uk/forum/index.php'topic=99803.0

harossa · « **Reply #4 on:** February 04, 2010, 09:14 PM »

1983 Nomura

phantom photon · « **Reply #5 on:** February 07, 2010, 02:14 PM »

Might as well stick mine in to make up the numbers

1983 Diamond Back Silver Streak

Spec:

Dimond Back Silver Streak Frame and Forks
Diamond Back stamped bars
FI type grips
Suntour Stem
Tange Headset
Dia Compe 890 calipers with DC pre-bent levers
Aero Seat
Fluted Seatpost
SR Seat Clamp
Sugino Crank
Sugino Spider and Chainring
Tioga Beartrap bottom bracket
Izumi Chain
Shimano Freewheel
MKS Pedals
Skyway Tuff II Wheels
Comp III type tyres
Firebird Steve Repro Padset

southern andy · « **Reply #6 on:** February 09, 2010, 06:16 PM »

NOSTALGIA TIME

Halfords Turbo 16" pit bike

Might aswell enter it.

Pretty much 100% survivor parts apart from few bits that were beyond help.

With it's bigger brother then

glenboy · « **Reply #7 on:** February 11, 2010, 10:39 PM »

Here it is i got most of the bike bar the wheels and pedals from portland usa and got the wheels and pedals from victoria australia , so well travelled assembled 09/2/2010
Redline frame and forks oval redline stamp under bb and 6 digit number starting with 5 i reckon its 1983-85 as my guess not sure exactly what the frame model is, any help appreciated there

redline flight 175 crank
phil wood spider
mx1000 rear brake
ukai blue rims with polished sides and red,white and blue bullsey hubs
crupi pro bear cage pedals
gt long stem
redline bars
ame grips
etc

Bigplinky · « **Reply #8 on:** February 12, 2010, 07:06 PM »

The basis of the bike was to have parts from around 1984 and use original finishes where possible.

Frame and Forks :late 83 Hutch Pro Racer (USA made with serial number). Powder by SBD and decals by Chris Baron
Headset: Tange 300
Headlock: Hutch Black Anno
Stem: Hutch Deep H Black Anno
Bars: Hutch Pro Racer
Grips: Oakley B1-B
Brake: Dia-Compe MX900 (with centering) Tech 3 Lever Chrome
Crank: Profile Gen 3 185mm
Pedals: Hutch USA made brown bearing
Chainwheel: Sugino DB Turbolite 44t
Chain: Izumi 3/32
Hubs: Hutch Mag/Ti (mine from BITD)
Rims: Araya Aero 1.75
Tyres: Comp 4 Fat/Thin
SPC: Hutch Black Anno
Seat: Kashi Aero
Brake Guard: MRD (mine from BITD)
Pads: Hutch Zap (mine from BITD now a bit gold but they match the hubs real nice)
Plate: Haro Flow Plate (mine from BITD)

For more background on the bike see http://www.radbmx.co.uk/forum/index.php/topic,103261.msg1020617.html#msg1020617

Cheers

Andy

joe6187 · « **Reply #9 on:** February 15, 2010, 03:25 PM »

88 HARO TEAM MASTER

Spec

88 Haro Team master F/F with forkstand
Haro Team freestyle stem
Haro keensavers bar
Haro HMP 2.0 tires
Haro pegs
Haro Team Disk 447
Haro fulted seatpost
DC Tech 7 levers
DC Nippon front caliper
DC 990 rear brake system
DC front cable
Peregrine seat clamp
Peregrine Super Pro wheelset
Peregrine 3 pcs crankset with Anlan sealed BB
Shimano DX pedal
Odyssey Gyro with cables
YST headset
Viscount Dominater seat
AME rounds grips (bubble fonts)
Suntour 14T freewheel
Izumi chain
Tioga superlate tube

More pic right here : http://www.radbmx.co.uk/forum/index.php'topic=103822.msg1025466;boardseen#new

ultra_aeroburnernev · « **Reply #10 on:** February 23, 2010, 03:44 PM »

Hi all, i know you are not that keen on burners, but here is my Aero pro ive finished last week, its not really got anything raleigh on it, Its Tange frame & Forks, Mirror polished Tange 125 headset, sugino crank with nos 44t chainring, kashimax seat fully restored, araya aero rims with suntour sealed bearing hubs, MX dia compe brakes. suntour stem, tange grips, sr custom m pedals, cro-mo bars. A lot of time, money and hard graft gone into it and really pleased with the outcome, took 3 months to complete, so thought i would give it a crack in here.

Cheers all and i hope you like it.

Nev.

louisdog · « **Reply #11 on:** February 23, 2010, 09:06 PM »

This is my 82 Silver Streak, restored to og spec,

N13L VV · « **Reply #12 on:** February 27, 2010, 11:54 PM »

Ok Firstly im blown away with Joes gorgeous gold haro which will be getting my vote, especially for the best pics ive ever seen

Anyway to keep Nev company and to keep the BURNER

numbers up here is my FACTORY SPEC 84 Team Aero Pro Burner . Ive been working on this for months now trying to get all the correct parts including the almost impossible to get front fleccie and almost as hard D.I.D chain and white tuff pads.

TEAM AERO PRO

1984 Team Aero Pro F&F
Tange 300 headset with new decal
Rechromed Aero Pro High rise bars
Rechromed sugino cr-mo stamped crank
polished tange BB
sugino black chainwheel
Sugino chainguard
Sugino bolts
nos Sugino spider
D.i.d. Chain
Nos Suntour stem
Nos Tange grips
Alloy hubbed skyway tuffII's (bleached)
Tioga yellow label compIII tyres 20x1.75 F&R
Nos Skyway TUFF pads
Dia Compe MX calipers with thread covers and new DC decals
Dia Compe Tech 3 levers
Dia Compe Black brake cables
Dia Compe cable clips
suntour Seat clamp
nos Seatpost
Raleigh branded Kashimax
SR custom M pedals
new decal kit
new padset
new white outlined headtube decal
FRONT !! and rear reflectors on cat eye brackets .
NOS aero raceplate with repro team decal

Heres the link to the full build thread .

http://www.burnerworldforum.co.uk/viewtopic.php't=20733

bobafett · « **Reply #13 on:** February 28, 2010, 12:38 PM »

1982 Supergoose (rider)

Full build thread here: http://www.radbmx.co.uk/forum/index.php'topic=104586

1982 supergoose frame & team forks (serial J2003415)
1983 un-stamped GT pro bars (with custom decals)
Alloy pro-class rims powdered white with NOS suzue sealed hubs, NOS spokes & red nipples (and custom pro class decal)
NOS Rad Kaps Dice
Stamped GT layback post (with custom decal)
NOS viscount aero (custom mongoose decals)
NOS Dia Compe MX hinged seat clamp
Redline twin pinch 180 cranks
Chrome Sugino Spider
Sugino 44T powdered white
NOS Victor DX
NOS FUAN F1 grips
NOS Dia Compe 901 rear and tech4 lever
Kool Stop Eagle 2 pads
Forklifter style stem (possibly a mongoose FS1 stem, added a custom mongoose decal)
mongoose stamped headset
Tioga comp 4 tyres - both 1.75
re-pop mongoose flight pads
survivor downtube and head tube decals, NOS genuine mongoose fork decals, custom seat tube decals.

MaD-RoK · « **Reply #14 on:** March 01, 2010, 03:17 PM »

SUPER TEAM AERO PRO

Chrome AP F/F with a little bit of superchrome
Tange300 headset
GT Pro bars
Tuf Neck stem
Polished araya aeros on suzue hubs
Tioga comp3eeez
Sugino GT Cranks with Raleigh dust caps
Shimano DX pedals
Shimano DX seatpost
Kashimax Aero seatage
DC MX900 and tech 3 lever
Suntour seatclamp
Tangay grips
and a ickle Izumi chain

Gashead · « **Reply #15 on:** March 01, 2010, 08:33 PM »

Voting is open

rollin72 · « **Reply #16 on:** March 02, 2010, 01:00 PM »

amazing builds as always, but that haro is fooki awesome

brettypeeps · « **Reply #17 on:** March 03, 2010, 08:20 PM »

I concur the master gets my Vote

brass monkey! · « **Reply #18 on:** March 03, 2010, 08:32 PM »

Joe Cool !

bling bling !!

neiljonarcus · « **Reply #19 on:** March 04, 2010, 06:17 AM »

votes is in del or andy del or andy del or andy del or andy del or andy del or andy del or andy del or andy del or andy del or andy del or andy del or andy

agrhhhhh why do you guys build so nice bikes and can i vote twice please