Unknown Hubs, Any Ideas Please?

[monkian]

No marks apart from on the bearings (6000LB NTN) which I think only identifies the bearings!
No steps in the cones (smooth / skinny) Any ideas? Thanks, Paul

[MartyC]

Actually look like Suzue/Peregrines without the decals to me 

[stidds]

Looks similar to a Suzue Promax Track hub to me.

[monkian]

I don't know anything about Suzue Promax Tracks (you'll have to educate me)
I wasn't sure about Peregrine's but all I had to go by were these loose balls:

[MartyC]

Suzue made the Peregrine hubs 

I'm sure they did a sealed bearing version too.  What rims are they laced into?

[monkian]

Suzue made the Peregrine hubs 

I'm sure they did a sealed bearing version too.  What rims are they laced into?

They're laced to some kind of Araya's.
The loose Ball Peregrines have Suzue stamped on the bearing housing and I think the sealed versions seem to have a larger bearing diameter
I don't know if the spec changed over time. Found these, I don't know the date on them but apparently bought in 2009:

[monkian]

Here's a shot of the Araya Stamp:


Any ideas what they are??

[The Redline]

Hello Paul my friend,

i think also that theese are Joy tech,  this ones were the first imported redline 48īs to germany . 

[monkian]

Hey Alfredo,
I still don't think we've quite sorted it yet. There's a couple of differences I've spotted on the hubs in your pics.
The cones seem to be a slightly different shape and on the rear (non-threaded side) they have two steps out to the axle (if that makes sense).
There are certain similarities though, perhaps a different year/model? Who knows?

Thanks for your input

[MartyC]

Hey Alfredo
I still don't think we've quite sorted it yet There's a couple of differences I've spotted on the hubs in your pics.
The cones seem to be a slightly different shape and on the rear (non-threaded side) they have two steps out to the axle (if that makes sense)
There are certain similarities though, perhaps a different year/model? Who knows?

Thanks for your input

The shape of the hubs are different too,  I don't hink they are the same.  I stick with Suzue/Peregrine 

[monkian]

Thanks Marty
Do you think they could be loose ball Peregrines with a Sealed Axle conversion?

[The Redline]

Hi guys,

to complete our  peregrine oldschool section here is the sansin type:

[monkian]

It's pretty close but the cones are a slightly different shape due to that lip and they're stamped.
Good section this for reference. Thanks again for your help