gfxgfx
 
logo
 
gfx gfx
gfx
975793 Posts in 138943 Topics by 6363 Members - Latest Member: Bmxflex November 13, 2024, 02:50 PM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
gfx
gfxgfx
 

Author Topic: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.  (Read 8264 times)

0 Members and 1 Guest are viewing this topic.

Offline dordymush

  • Berm Worm
  • ***********
  • Posts: 10464
  • Rated:
I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« on: January 14, 2010, 12:14 PM »
right then i've hammered it i've sawed it and i've left it to soak in wd40 for 3 days but its still solid.
other than me smashing the lot up in a minute  :knuppel2:.
is there anything else i could try.
i've had hard ones in the past but this thing is a joke.
i was gonna heat it up but i think its brazed so will this fook the braze up if i do.
HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
dave the bmxing gypo


Offline Waxintaxin

  • Team Owner
  • Cherry Picker
  • *
  • Posts: 1090
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #1 on: January 14, 2010, 12:17 PM »
use your lucky heather lol

dave , just heat it a bit  to fook the braise its got to be fairly hot and cherry red at the least , so heat but dont go radio rental

Offline dordymush

  • Berm Worm
  • ***********
  • Posts: 10464
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #2 on: January 14, 2010, 12:21 PM »
lol i've tried the heather rich and threatened it with a curse if it never come out but its stubborn  :tickedoff:.

i'll get the heat on the fooker then.
keep ya fingers crossed lol.
dave the bmxing gypo


toys19

  • Guest
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #3 on: January 14, 2010, 12:24 PM »
I've done a few of these and I have two methods

1) The hook and pull.

A 10mm bar bend a hook onto either  end of it (might need a big vice) push it down catch on bottom turn bike upside down so its above the vice, or work mate catch frame or seat tube edges so they cant go anywhere and hammer the fook out of the other end of the hooked bar..

I've had fantasies about making a device that uses something like  one of those plasterboard fixing screws with two wedges so you can drop it down and it will open and catch on the bottom edges of the seat post but never needed it

If that doesn't work then

2) using a hack saw or dremel carefully cut through the inner diameter of the seat post to the out side, (like really carefully dont go all the way through, leave a sliver of thickness that can be broken with a stanley then peel the post inside itself with a hammer or stilsons. If its alloy then it a fook sight harder because its a thicker wall.

I that doesnt work then

3) Hide the frame in the attic, give up old school BMX live the rest of your life in shame..

Offline jimmyp

  • Look Back
  • *****
  • Posts: 1550
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #4 on: January 14, 2010, 01:23 PM »



3) Hide the frame in the attic, give up old school BMX live the rest of your life in shame..

You know it makes sense  :LolLolLolLol:

monkian

  • Guest
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #5 on: January 14, 2010, 01:24 PM »
What about a soak in Diesel or Petrol? ???
...then chucking a flaming rag at it :D ;D

Offline brummie

  • Team Moderator
  • My life is Radbmx
  • *
  • Posts: 208652
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #6 on: January 14, 2010, 01:26 PM »
been havin a think, if there is still some post showing could you drill a hole through it and stick a long bolt through? you could then hammer the bolt ( either sideways or down ) just a thought  ;)

tolaknawris

  • Guest
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #7 on: January 14, 2010, 01:36 PM »


grit & total determination is what is called for  :daumenhoch:

Offline southern andy

  • Site Supporter
  • Tail Whip
  • *
  • Posts: 5896
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #8 on: January 14, 2010, 01:44 PM »
I read somewhere the other day of a brilliant idea.


The bike was put in a vice then the guy bolted a spare handlebar stem on on to the seatpost, he then used a long hollow pole which he placed over the stem ( the part of stem that goes in to the head tube) and turned it using the long pole as leverage.  Every time it's been a success apparently.
One build a year, the only way to get it right. No rushing involved.

HEYWOOD BMX

  • Guest
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #9 on: January 14, 2010, 01:44 PM »
 :) If it`s an alloy post you could plug the hole from inside the BB & dissolve it to death? The drilling and shoving a bolt through it has worked for me in the past

toys19

  • Guest
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #10 on: January 14, 2010, 01:50 PM »
:) If it`s an alloy post you could plug the hole from inside the BB & dissolve it to death? The drilling and shoving a bolt through it has worked for me in the past

A guy did this dissolving thing on singletrack the other day http://www.singletrackworld.com/forum/topic/swollen-seatpost

I like the sound of the stem/big time leverage thing, I'm defo going to try that next time.
« Last Edit: January 14, 2010, 01:58 PM by toys19 »

Offline Swivel

  • Berm Worm
  • ***********
  • Posts: 13936
  • Ah feck it, go on then...
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #11 on: January 14, 2010, 02:02 PM »
What about a soak in Diesel or Petrol? ???
...then chucking a flaming rag at it :D ;D

 :daumenhoch:

Offline popedante

  • Curb Endo
  • **
  • Posts: 475
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #12 on: January 14, 2010, 02:26 PM »
I read somewhere the other day of a brilliant idea.


The bike was put in a vice then the guy bolted a spare handlebar stem on on to the seatpost, he then used a long hollow pole which he placed over the stem ( the part of stem that goes in to the head tube) and turned it using the long pole as leverage.  Every time it's been a success apparently.

this has worked for me , clamp old stem onto seatpost , that whack it with the biggest hammer you got
its not subtle....but then neither am i


(i put the bottom bracket of the frame onto the base of a garden parasol thingy while i whacked it , he he he )

Offline billstup

  • Team Owner
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #13 on: January 14, 2010, 03:47 PM »
I read somewhere the other day of a brilliant idea.


The bike was put in a vice then the guy bolted a spare handlebar stem on on to the seatpost, he then used a long hollow pole which he placed over the stem ( the part of stem that goes in to the head tube) and turned it using the long pole as leverage.  Every time it's been a success apparently.

Seat post clamped in to the vice, then turn the frame  :daumenhoch:
I see you stand like greyhounds in the slips,
 Straining upon the start. The game's afoot:
 Follow your spirit, and upon this charge
 Cry 'God for Harry, England, and Saint George!'

Offline WARDY

  • Double Flip Whip
  • ***********
  • Posts: 6211
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #14 on: January 14, 2010, 04:10 PM »
I read somewhere the other day of a brilliant idea.


The bike was put in a vice then the guy bolted a spare handlebar stem on on to the seatpost, he then used a long hollow pole which he placed over the stem ( the part of stem that goes in to the head tube) and turned it using the long pole as leverage.  Every time it's been a success apparently.

Seat post clamped in to the vice, then turn the frame  :daumenhoch:


exactly word for word what i was gonna say :daumenhoch:

Offline stidds

  • Site Supporter
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #15 on: January 14, 2010, 05:07 PM »
Is it a valuable frame Dave?

If not this is what it did to Jo's mid-school Redline when the seatpost wouldn't come out no matter what I soaked it in.

1) Drilled a hole through the seatpost that was visable.
2) Find a ballbearing that fits inside the seatpost and put it in.
3) Put a strong bolt through the hole I drilled in the post.
4) Turn frame upside down.
5) Drill a small hole in the underneath of the bottom bracket.
6) Put a metal bar though the hole in the BB and up-through the frame and into the seatpost which then rested against the ball bearing.
7) Hit the fook out of the bar.

Drastic I know, but it worked when all else failed.

Offline jT Racing

  • BMX Overlord
  • ***********
  • Posts: 17338
  • i like bikes. :/
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #16 on: January 14, 2010, 05:42 PM »
it's a nightmare dave. got 3 myself at the moment. an alloy that's welded itself in. that's being melted out at the moment with caustic, one cro-mo and the fecker has snapped just at the top of the seat tube using the vice and frame turn method, heat didn't help before that. it's gonna be a carefull sawing job. one i haven't tried yet, 2 nighmares at once is enough :LolLolLolLol:
just keep at it dave, before this one, the vice and turn the frame method has always worked for me, good idea is to find something to put inside the top of the post so you don't crush it too much and cause it to split. good luck. ;)
ding dong

greentoad

  • Guest
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #17 on: January 14, 2010, 06:52 PM »
Hi all

I hope this helps.

I said this years ago, but as before - really stuck metal is broken by freezing.

Video and data on below link -

http://loctitefreezeandrelease.com/

http://loctitefreezeandrelease.com/instructions.htm

http://www.loctite.com.au/cps/rde/xchg/henkel_aue/hs.xsl/3089_3250_AUS_HTML.htm

I worked with the Environmnet Agency for a while and the engineers used to freeze lock motors / guillotines and other outside large machinery when replacing stuck and corroded metal parts.

http://www.marineenginedigest.com/diy/fireandice.htm

DON'T FORGET GLOVES AND PPE

J.
« Last Edit: January 14, 2010, 07:35 PM by greentoad »

Offline dordymush

  • Berm Worm
  • ***********
  • Posts: 10464
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #18 on: January 14, 2010, 08:54 PM »
lol i tried the vice and turn the frame.
fooking thing broke off just above the seat post  :crazy2:.

thats it im gonna kill it.
wheres the sledge hammer  ;D
dave the bmxing gypo


Offline Tefore

  • Cherry Picker
  • ****
  • Posts: 1010
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #19 on: January 14, 2010, 09:17 PM »
young david.

try this
http://loctitefreezeandrelease.com/

it has yet to let me down its about £8 a tin though and stinks like mad so do it outside but it has worked its wonders for me loads of times.

Offline dordymush

  • Berm Worm
  • ***********
  • Posts: 10464
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #20 on: January 14, 2010, 09:28 PM »
i'll try anything at this point our paulio  :daumenhoch:
dave the bmxing gypo


winnit93

  • Guest
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #21 on: January 14, 2010, 09:42 PM »
hit it with the PUCH  :LolLolLolLol:

Offline dordymush

  • Berm Worm
  • ***********
  • Posts: 10464
  • Rated:
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #22 on: January 14, 2010, 09:49 PM »
lol you fooker ya.
i wish i'd never seen the fookin thing with you about  ;D ;D ;D
dave the bmxing gypo


oldschoolfool

  • Guest
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #23 on: January 15, 2010, 01:51 PM »
young david.

try this
http://loctitefreezeandrelease.com/

it has yet to let me down its about £8 a tin though and stinks like mad so do it outside but it has worked its wonders for me loads of times.

nice one bud,going to have to get some of that ;)

Juju

  • Guest
Re: I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
« Reply #24 on: January 15, 2010, 09:32 PM »
Can I ask, whats the frame, and what's the seat?

If it's corrosion expansion from rust, ie cromo to cromo, then try the above mentioned methods.

I seem to recall that if its ali to cromo, then its a chemical reaction between the metals, not rust expansion, and so something like amonia is the way to go.

http://sheldonbrown.com/stuck-seatposts.html

This man is *the* bicycle expert.

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  I HAVE THE STUCK IN SEAT POST FROM HELL. HELPPPPPPPPPPP.
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal