Author Topic: Stripping paint off powder coat?? (Read 1146 times)

Dr.Robotnik · « **on:** December 21, 2009, 02:26 PM »

Anyone know what products can strip paint off powder coat without harming the PC? I rattle canned my old Kink back in the day over the powder coat and would like to restore it a little before it gets mounted on the wall....would acetone do it?

Also can I polish powder coat e.g. rub it down with some super light wet and dry, then autosol and wax?

Cheers

andy_116 · « **Reply #1 on:** December 21, 2009, 04:20 PM »

could try t-cut or somthing, probably can polish up powdercoat, just depends how thick the paint is

Dr.Robotnik · « **Reply #2 on:** December 21, 2009, 07:27 PM »

Quote from: andy_116 on December 21, 2009, 04:20 PM

could try t-cut or somthing, probably can polish up powdercoat, just depends how thick the paint is

Does T-cut affect powder coat? If not it might be just the job. Anyone else care to chime in?

Dingobmxer · « **Reply #3 on:** December 21, 2009, 07:55 PM »

try brasso (the stuff in the bottle not in a tin with wadding)

It has a solvent in it and a very slight abrasive (try it in an area that wont be seen first)

Dingo

Gary72 · « **Reply #4 on:** December 21, 2009, 08:03 PM »

Pop SuperBikeDan a PM, he is the powdercoat King on here. But to be honest might be easier, and quicker to strip to bare metal and re-powder. You will be surprised that once you have a close look at the frame how many chips and marks there are.